This paper addresses a scenario where a medium sized smart city in an Alliance nation has been struck by disaster. A small, multi-national force is deployed for disaster relief. Situational awareness (SA) is important so that resources, including personnel and supplies, may be prioritized to have the most impact and help those in the most need. This SA can be significantly enhanced via information obtained from Internet of Things (IoT) devices, especially in a smart city environment. This paper, which presents work performed by the NATO IST-147 “Military Applications of Internet of Things” group, explores the potential to exploit smart city IoT capabilities in military operations.
Disaster recovery operations are extremely challenging and place significant demands on multiple resources, including local and international emergency response personnel, non-governmental organizations, and the military. In the immediate aftermath of a disaster, one of the most pressing requirements is for situational awareness (SA) so that resources, including personnel and supplies, may be prioritized to have the most impact and help those in the most need. As the recovery operations continue, the SA needs to be continuously updated based on changing conditions in the affected areas. There are many sources of information to provide SA, including reporting by the victims of the disaster as well as observations made by responding personnel. In this context, SA can be significantly enhanced via information obtained from Internet of Things (IoT) devices, especially in a smart city environment. This paper explores the potential to exploit Smart City IoT capabilities to help with disaster recovery operations.
Ensuring security in the military applications of IoT is a big challenge. The main reasons for this state of affairs is that the sensor nodes of the network are usually mobile, use wireless links, have a small processing power and have a little energy resources. The paper presents the solution for cryptographic protection of transmission between sensor nodes in the data link layer and for cryptographic protection of data stored in the sensor node resources. For this purpose, the Trusted Platform Module (TPM) was used. The proposed solution makes it possible to build secure and fault tolerant sensor network. The following aspects were presented in the paper: the model of such a network, applied security solutions, analysis of the security in the network and selected investigation results of such a network were presented.
Recently, there has been a fairly rapid increase in interest in the use of UAV swarms both in civilian and military operations. This is mainly due to relatively low cost, greater flexibility, and increasing efficiency of swarms themselves. However, in order to efficiently operate a swarm of UAVs, it is necessary to address the various autonomous behaviors of its constituent elements, to achieve cooperation and suitability to complex scenarios. In order to do so, a novel method for modeling UAV swarm missions and determining behavior for the swarm elements was developed. The proposed method is based on bigraphs with tracking for modeling different tasks and agents activities related to the UAV swarm mission. The key finding of the study is the algorithm for determining all possible behavior policies for swarm elements achieving the objective of the mission within certain assumptions. The design method is scalable, highly automated, and problem-agnostic, which allows to incorporate it in solving different kinds of swarm tasks. Additionally, it separates the mission modeling stage from behavior determining thus allowing new algorithms to be used in the future. Two simulation case studies are presented to demonstrate how the design process deals with typical aspects of a UAV swarm mission.
Some obtained results related to an ongoing project which aims at providing a comprehensive approach for implementation of Internet of Things concept into the military domain are presented. A comprehensive approach to fault diagnosis within the Internet of Military Things was outlined. Particularly a method of fault detection which is based on a network partitioning into clusters was proposed. Also, some solutions proposed for the experimentally constructed network called EFTSN was conducted.
The paper describes a protocol for secure data transmission in Wireless Sensor Networks (WSN). The essence of the process is to ensure security attributes of data transfer in the data link layer. In the paper a model of network consisting of sensors' domain is described. The domain includes one root node (M node), which is a security authority in the domain, and sensor nodes (S node). The proposed protocol involves the M node initialization, S nodes registration, and data transfer between M node and S nodes. All the data security procedures are supported by the Trusted Platform Module (TPM).