Recovering energy from waste energy sources is an important issue as environmental pollution and the energy crisis become serious. In the same context, recovering liquefied natural gas (LNG) cold energy from an LNG-powered ship is also important in terms of energy savings. To this end, this study investigated a novel solution for a LNG-powered ship to recover LNG cold energy. Six different organic Rankine cycle (ORC) systems (three for high-pressure dual-fuel engines and three for medium-pressure dual-fuel engines) were proposed and optimized; nine different working fluids were investigated; annualized costs for installing proposed ORC systems were estimated based on the optimization results. In addition, a sensitivity analysis was performed to identify the effect of uncertainties on the performance of the ORC systems. As a result, the ORC system for the medium-pressure engines with direct expansion, multi-condensation levels, and a high evaporation temperature exhibited the best performance in terms of exergy efficiency, net power output and actual annualized cost. These results demonstrate the possibility of replacing a typical LNG supply system with an ORC system.
In this study, exergy and economic analysis were conducted to gain insight on small-scale movable LNG liquefaction considering leakage. Optimization and comparison were performed to demonstrate the quantitative results of single mixed refrigerant, dual nitrogen expansion, and the propane pre-cooling self-refrigeration processes. For the optimization, exergy efficiency was used as the objective function; the results showed that exergy efficiencies are 38.85%, 19.96%, and 13.65%, for single mixed refrigerant, dual nitrogen expansion, and propane pre-cooling self-refrigeration, respectively. Further, the cost analysis showed that the product cost of each process is 4002.3 USD/tpa, 5490.2 USD/tpa, and 9608.5 USD/tpa. A sensitivity analysis was conducted to determine parameters that affect exergy and cost. The SMR process is the most competitive in terms of exergy efficiency, product cost, and operability, without considering makeup facilities.