Pressurization ventilation techniques, originally designed to control building fires, have never been applied to the mines. The working face, backfilled with fly-ash-based materials, is likely to be contaminated during, and even after, the curing period of the backfill materials. Gases such as NH3 and CO2 may leak out prolongedly from the backfilled sites. Proper ventilation schemes should be implemented to control toxic gas leakage and thus minimize the workers’ exposure. This study aims at evaluating the applicability of a pressurization ventilation scheme at backfilled working faces in large-opening limestone mines. To pressurize the working face, two different fans (15 kW and 37 kW) were developed and two ventilation scenarios were tested. Computational Fluid Dynamics (CFD) analysis was also carried out for comparison purposes. There is no established standard for differential pressure between the inside and outside of working faces to prevent gas leakage at mines. However, taking the differential pressure of 50 Pa in British standards for controlling building fires (where a relatively stronger dissipation force than the gas leakage of a mining face occurs), the pressure differential created by two blowing fans seems to be sufficient to control the gas leakage and dispersion within the work space.
Recently, deployment of large-capacity diesel haulage trucks is rapidly increasing in the domestic large-opening limestone mines due to the high level of operational flexibility. However, in multi-level mines, this trend has raised the serious concern for the risk of diesel vehicle fire. Fire in a deep multi-level mine site is harder to control and likely to develop into disastrous results. Developing the emergency evacuation strategies and controlling the fire should presuppose a knowledge of the fire behavior in mines. This paper aims at studying the behavior of a 25-ton diesel truck fire showing approximately the maximum heat release rate of 30 MW by computational fluid dynamic analysis. Spatial and temporal distributions of the hot air stream, smoke layer, and CO gas layer in multi-level mine sites are evaluated, and the effects of fan operation are scrutinized to find the appropriate fan location and operating mode. In addition, several other aspects of the fire development such as backlayering and throttling effects are also studied. The ultimate goal is to provide fundamental information about fire propagating characteristics in multi-level large-opening underground limestone mines for developing the mine fire evacuation plan and protect the workers’ safety.
1 April 2021 in Journal of the Korean Society of Mineral and Energy Resources Engineers