Inertial navigation systems/Doppler velocity log (INS/DVL) integrated navigation systems are widely used in underwater environments where GPS is unavailable. An INS/DVL integrated navigation system is generally loosely coupled; however, this does not work if any of the DVL transducers do not work. If a system is tightly coupled, velocity error can be estimated with fair accuracy even if some of the transducers fail. However, despite the robustness of a tightly coupled system compared to a loosely coupled one, velocity error estimation accuracy of the former decreases as the number of faulty transducers increases. Therefore, this paper proposes an INS/DVL/revolutions per minute (RPM) integrated navigation filter designed to improve the performance of conventional tightly coupled integrated systems by estimating data from faulty transducers using RPM data. Two salient features of the proposed filter are (1) estimating RPM data accounting for error from the effect of tidal currents and (2) continuous estimation of error in RPM data by selectively converting only the measurements of faulty transducers. The performance of the proposed filter was first verified using Monte Carlo numerical simulations with the analysis range set to 1 standard deviation (1σ, 68%) and then with real sea test measurement data.
31 October 2019 in Journal of Ocean Engineering and Technology
서 론 관성측정장치(IMU, Inertial measurement unit), 도플러 속도센 서(DVL, Doppler velocity log)는 수중 환경에서 복합 항법을 구 현하기 위해 사용하는 대표적인 센서이다. IMU는 비력(Specific force)을 측정하는 가속도계와 회전운동을 측정하는 자이로를 이용하여 항체의 가속도 및 각속도를 측정한다. 이를 통해 주위 환경에 영향 받지 않고 자세, 속도, 위치정보를 독립적으로 계 산할 수 있다. 하지만 IMU는 적분과정을 통해 항법 결과를 계 산하기 때문에 짧은 시간에는 정확하나 시간이 지남에 따라 항 법오차가 누적되는 단점이 있다(Titterton and Weston, 1997). 이 러한 IMU의 단점을 극복하기 위해 DVL 등 외부센서를 이용하 여 항법 결과값을 보정하는 방법이 다양하게 연구되고 있다. DVL은 도플러 효과를 이용하여 수중운동체의 속도를 측정하 는 센서다. 수중운동체가 움직이면서 지면에 음파를 송신하였 을 때 해저면으로부터 반사되어 돌아오는 수신신호의 진동수 변화를 관측함으로써 물체의 속도를 측정할 수 있다. DVL은 4 개의 트랜스듀서가 JANUS 형상에 따라 배치되어 있으며 각각 의 트랜스듀서에서 측정된 속도를 변환좌표계를 이용하여 동체 의 3축에 대한 속도로 변환한다(Rudolph and Wilson, 2012). 일반적으로 DVL을 이용한 관성항법장치(INS, Inertial navigation system)의 속도보정 알고리즘은 DVL에서 계산된 동체좌표계의 속 도를 칼만필터의 측정치로 이용하는 약결합(Loosely coupled) 방식 으로 구성된다. 약결합방식은 강결합방식에