The objective of this study is to derive a design methodology for a zero-energy building considering the energy production and consumption of the building. In order to establish the design methodology, various factors affecting the energy production and consumption of the building are derived, and the effect of the heat transmission rate, the surface to volume ratio (S/V ratio), the location and the orientation of the building are analyzed by simulation method. As a result, the S/V ratio and the heat transmission rate are the most important factors in the central region of Korea where consumes large amounts of heating and cooling energy. This is because the final energy consumption varies depending on the heat loss through the envelope. It was confirmed that solar power generation is the most important factor in the southern regions of Korea where the energy consumption is relatively small. The final energy consumption varies depending on the solar power generation in these areas. Therefore, when designing a zero-energy building, the zero-energy of the building can be achieved by using the design methodology established in this study.
In order to expand the zero-energy building, it is necessary to evaluate the economic feasibility of the passive and active elements applied to achieve the zero-energy building. The purpose of this study is to verify the final energy consumption and investment cost of a building according to the change of passive and active elements. In this study, the final energy consumption was calculated by region for the passive element S/V ratio (surface-to-volume ratio), the building’s orientation, and the active element (building-integrated photovoltaic) for the Department of Energy reference building type using simulations. In addition, the change in investment cost according to changes in energy consumption and production was calculated. As a result of the study, it was reasonable to invest in passive elements rather than active elements in the central region of Korea, and it was confirmed that investment in active elements was highly economical in the southern region of Korea. It is expected that the results of this study can be used as a guideline to enable the economic analysis of design elements in the design of zero-energy buildings.
30 August 2024 in Journal of the Korean Solar Energy Society
This study investigated whether building integrated photo voltaic (BIPV) can achieve energy independence in zero-energy buildings. We analyzed BIPV energy generation data from a certified zero-energy building to verify this. The first method involved analyzing the correlation between the energy generation data and BIPV installation factors. The energy generation by BIPV based on installation factors, such as location and direction, were analyzed at minute intervals for one year. Additionally, the energy generation performance was compared using the Capacity Utility Factor, which is a measure of the power generation facility utilization rate. The second method was a correlation analysis between the energy generation data and environmental factors. The environmental factors included time and 21 types of numerical meteorological data. Among these factors, solar radiation had the strongest correlation with energy generation. Bases on this finding, verification was performed by comparing solar radiation data with energy generation data. This verification confirmed the presence of a transmission error in the BIPV inverter data.