Green coffee parchment (GCP) is becoming interesting, due to the diffusion of wet processing in which coffee parchment is collected separately; it is one of the less studied coffee by-products, but it is reported to be rich in phenolic compounds and dietary fiber. The addition of GCP (355–500 μm) at 2 % to gluten-free breads was investigated in terms of physical properties (volume, moisture content, water activity, crumb grain, texture, and color), total antioxidant capacity (TAC) and total phenol content during three days of storage. Moreover, the effects of GCP on sensorial characteristics, 5-hydroxymethylfurfural (HMF), and oxidative stability was evaluated. From the sensorial analysis, bread with 2% addition resulted in being acceptable for consumers with no significant differences from the control, while 4% of GCP was discarded by consumers, as it resulted in being too bitter. Moreover, GCP at 2% addition did not modify volume, moisture content, and water activity. On the contrary, GCP deeply affected the color with a darker aspect that was appreciated by consumers. Regarding texture, 2% of GCP did not affect hardness, cohesiveness, and staling process during storage. Interestingly, 2% of GCP significantly improved the TAC and oxidative stability of the bread; in accordance with these results, 2% of GCP reduced the HMF content, thanks to its antioxidant compounds.

Stabilization of ohmic pretreated peach cubes (ohm) in syrup, representative of semifinished fruit products, was finalized by ohmic heating (OHM) and high pressure processing (HPP), proposed respectively as thermal and nonthermal pasteurization, in comparison to a conventional pasteurization treatment (DIM). The samples were then studied in terms of histological, physical (dimensional distribution, tenderometry, texture, viscosity of syrup and colour), chemical (total phenolic and ascorbic acid content), and sensorial (triangle test) properties. Severe modifications of the cell walls were observed in ohm-DIM and ohm-OHM samples, with swelling and electroporation, respectively. From chemical analyses, significant reduction of ascorbic acid and simultaneous increase of total phenolics content were observed for ohm-DIM and ohm-OHM, probably in relation to the cell wall damages. ohm-HPP showed the best preservation of the dimensional characteristics and hardness, followed by ohm-OHM and ohm-DIM. In addition, textural and colour parameters evidenced similar results, with ohm-HPP as the less different from ohm. Finally, the sensorial analysis confirmed ohm-HPP and ohm-OHM samples as the most similar to ohm as well as the most appreciated in terms of colour and consistency.

One of the most difficult issues in the juice industry is to manufacture juices where processing processes minimise the impact on the native characteristics of the fruits. In this study, high-pressure technology was used on whole apple fruits in order to evaluate the effect on the juice production. Two varieties, cv. Limoncella and cv. Pink Lady, were considered. Preliminarily, the fruits were subjected to different pressures, and histological as well as pomological measurements were taken in order to identify the best treatment condition, which was established to be 600 MPa for 3 min. Juice samples were then characterised by measuring the colour, viscosity, total antioxidant capacity (TAC), and total phenolic content (TPC). The storage colour stability of the juices for both varieties showed not significant L* values between the untreated and pre-treated fruits. Juices obtained from pre-treated fruits had a viscosity significantly higher than that obtained from untreated ones. Interestingly, the TPC of high-pressure processing (HPP) pre-treated juice resulted in being significantly higher compared to the untreated ones. The HPP pre-treatment can be considered as a commercial application to modulate some quality standards for apple juice production.