Expectations of traditional and contemporary buildings are different in terms of thermal comfort. Traditional buildings mostly achieve comfort through passive means, without HVAC support, but old levels of thermal satisfaction do not meet today’s expectations, although their passive thermal performances are notable for contemporary building designs. In this regard, the current study tries to investigate the possibility of comparing traditional and contemporary buildings’ construction techniques to achieve thermal comfort from an architectural point of view. In other words, is it possible to achieve passive building design by considering vernacular architecture principals as a reference? Likewise, how well can architects define insulation layers in contemporary construction surfaces in hot and humid climates? To this end, a dynamic, numerical, thermal calculation case study has been modeled in Famagusta, Northern Cyprus, to answer the above-mentioned questions. A mixed-use mode benefitting free-run periods is proposed and compared with a mode providing 24 hours of air-conditioning in different scenarios using the same initial settings. Thus, different floor-to-ceiling heights, insulation placements and indoor conditions have been tested separately in both winter and summer periods. The results show that thermal comfort can be achieved in free-run periods only during a limited percentage of the year. Furthermore, although increasing building heights may lead to a rise in the free-run periods, in contemporary buildings it increases the total energy usage of the buildings between 6% and 9% in the mixed mode. Therefore, vernacular architecture strategies are proper in their own context. However, this energy usage can still be controlled and optimized by such considerations as insulation material placement. In this regard, the best envelope properties for different building functions are proposed for application in hot and humid climates.
Literature review shows that, to date, no local based method has been developed for evaluation of optimal wall constructions in a hot and humid climate from architects’ point of view. Hence, this study aims at developing a multi factor optimization model (MFOM) for comparative selection of opaque wall construction in a hot and humid climate based on four main evaluation criterion namely energy efficiency, thermal comfort, moisture control, and cost efficiency. In order to indicate the application of the MFOM, a case study methodology was employed in Kish Island, Iran, which is characterized by a hot and humid climate. Both qualitative and quantitative research methods were employed in the research process including literature and field survey, computer simulation, thermal, moisture and economic analysis finalized with a simple multi attribute rating technique (SMART) grading the outputs for final assessment. According to the results, it can be deducted that the application of the MFOM has the potential to save cost and energy, improve the thermal quality of the indoor environment while predicting the possible construction hazards posed by condensation in hot and humid climates.
Unfortunately, most Iranian contemporary buildings in different climatic regions are constructed in the same way, with no consideration for climatic comfort. Electrical equipment for cooling and heating in Iran is easy to use and cheap. However, all of the natural resources, such as gas and oil, will one day be depleted, so how will future generations cope? Architects need to create a sample model for each climatic region, in which spaces are arranged to maximize thermal comfort periods, with a passive design. This research conducts an environmental analysis of traditional Iranian buildings in the hot-humid, temperate-humid, and cool climatic regions of Iran, making use of graph theory and a matrix analysis method, both of which are fast and easy to use for the assessment of naturally ventilated buildings. The selected traditional building envelope, spatial organization and seasonal movements of the users in the buildings were examined to determine the design characteristics of traditional buildings. The findings were used to develop a model to help architects to design openings and spatial locations in buildings, according to the natural ventilation and solar control of traditional buildings in the climatic regions of Iran. The model can be used as a guide for contemporary passive building design during the design stage.