Flexible white organic light-emitting diodes (FWOLEDs) have considerable potential to meet the rapidly growing requirements of display and lighting commercialization. To achieve high-performance FWOLEDs, (i) the selection of effective flexible substrates, (ii) the use of transparent conducting electrodes, (iii) the introduction of efficient device architectures, and iv) the exploitation of advanced outcoupling techniques are necessary. In this review, recent state-of-the-art strategies to develop FWOLEDs have been summarized. Firstly, the fundamental concepts of FWOLEDs have been described. Then, the primary approaches to realize FWOLEDs have been introduced. Particularly, the effects of flexible substrates, conducting electrodes, device architectures, and outcoupling techniques in FWOLEDs have been comprehensively highlighted. Finally, issues and ways to further enhance the performance of FWOLEDs have been briefly clarified.
Recently, all-inorganic perovskite light-emitting diodes (PeLEDs) have attracted both academic and industrial interest thanks to their outstanding properties, such as high efficiency, bright luminance, excellent color purity, low cost and potentially good operational stability. Apart from the design and treatment of all-inorganic emitters, the device engineering is another significant factor to guarantee the high performance. In this review, we have summarized the state-of-the-art concepts for device engineering in all-inorganic PeLEDs, where the charge injection, transport, balance and leakage play a critical role in the performance. First, we have described the fundamental concepts of all-inorganic PeLEDs. Then, we have introduced the enhancement of device engineering in all-inorganic PeLEDs. Particularly, we have comprehensively highlighted the emergence of all-inorganic PeLEDs, strategies to improve the hole injection, approaches to enhance the electron injection, schemes to increase the charge balance and methods to decrease the charge leakage. Finally, we have clarified the issues and ways to further enhance the performance of all-inorganic PeLEDs.
This work focuses on the crystal size dependence of photoactive materials and light absorption enhancement of the addition of carbon dots (CDs). mac-FTO (macroporous fluorine-doped tin oxide) films with an inverse opal structure are exploited to supply enhanced load sites and to induce morphology control for the embedded photoactive materials. The Bi2WO6@mac-FTO photoelectrode is prepared directly inside a mac-FTO film using a simple in situ synthesis method, and the application of CDs to the Bi2WO6@mac-FTO is achieved through an impregnation assembly for the manipulation of light absorption. The surface morphology, chemical composition, light absorption characteristics and photocurrent density of the photoelectrode are analyzed in detail by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (DRS), Energy dispersive X-ray analysis (EDX) and linear sweep voltammetry (LSV).