The worldwide storage volume of reservoirs is estimated to decrease by 0.5–1% per year due to sedimentation, which is higher than the gain in volume by newly built dams. For water supply or flood protection, the preservation of the storage volume is crucial. Operators and authorities, therefore, need sediment management concepts to ensure that the storage volume is sufficient. In this study, we developed a sediment-flushing concept using 2D numerical modelling for a run-of-river hydropower plant located in the Saalach River in southeastern Germany. The calibrated bed elevation was used as the initial bed for a number of simulations with different discharge regimes under varying operational schemes. By comparing the simulated results, we propose an appropriate flushing scheme in terms of intensity and duration to obtain a balance of sediment regime in the river. Furthermore, we demonstrate that such an optimised sediment management can generate synergies for improving measures of flood protection.
Reservoir sedimentation is a critical issue worldwide, resulting in reduced storage volumes and, thus, reservoir efficiency. Moreover, sedimentation can also increase the flood risk at related facilities. In some cases, drawdown flushing of the reservoir is an appropriate management tool. However, there are various options as to how and when to perform such flushing, which should be optimized in order to maximize its efficiency and effectiveness. This paper proposes an innovative concept, based on an artificial neural network (ANN), to predict the volume of sediment flushed from the reservoir given distinct input parameters. The results obtained from a real-world study area indicate that there is a close correlation between the inputs—including peak discharge and duration of flushing—and the output (i.e., the volume of sediment). The developed ANN can readily be applied at the real-world study site, as a decision-support system for hydropower operators.
In recent decades, a variety of morphodynamic model systems have been developed to improve our understanding of sediment transport and the resulting changes in riverbed topography. Despite progress in the description of physical processes, the degree of accuracy of morphodynamic model results remains difficult to assess and are also less than for hydrodynamics alone. In this paper, three different 2D morphodynamic systems have been applied to simulate a complex hydrodynamic and morphodynamic situation. These model systems were validated using data of sediment sorting and bed deformation conducted in a 180° channel bend under unsteady-flow conditions. The calculations obtained by each modeling system were compared with the available observed data. The simulated results showed that all applied morphodynamic models could precisely calculate the bed level changes and the areas of deposition and scour. However, the models are not efficient enough to predict the distribution of the mean grain size in the channel bend.
1 July 2019 in International Journal of River Basin Management
Rivers are dynamic systems, changing over time on their own or due to engineering measures and structures. At rivers which are regularly monitored, information on sediment balance can be used to evaluate the morphological development and to assess the impact of such measures. In this paper, we show that the performance of a numerical model can be improved by quantify boundary conditions, and that the simulation results of such a well-developed model will be more useful for civil engineers. As a case study, we develop a model system based on TELEMAC-SISYPHE to study the morphology of the Saalach River, where erosion and sedimentation impacts local ecology and human safety. Based on the available measurements and a sediment balance concept, we estimate the amount of sediment supplied to the river section downstream of a reservoir as well as the volume of the bed sediment transported along the river channel in different years. Using this information as boundary conditions for calibration and validation cases, the model provides a realistic and accurate representation of the river. Furthermore, our model has been successfully employed on the Saalach River to evaluate an alternative strategy for a more sustainable river management