An aerodynamic journal bearing that is capable of self-generating squeeze-film pressure is presented and its dynamic characteristics investigated numerically and experimentally. A numerical method based on a time-marching static model was applied to assess the orbit trajectory path of the rotor upon a perturbation. Experimental results were obtained to validate the effect of the self-generated squeeze-film pressure on the stability of the rotor. Analyzing the Fast Fourier Transform (FFT) responses of the rotor orbits enabled identification of self-excited whirling instabilities. Both numerical and experimental results showed that increasing the squeeze-film effect of the bearing could raise the threshold speed of instability.
Results of experimental studies concerning the influence of permanent magnetic field on wear of lubricated sliding contact operating at short stroke and high frequency are presented. It was found that horizontal magnetic is affecting performance of the contact. The jagged delamination regions produced in the presence of a magnetic field can be regarded as easily undergoing oxidisation because oxygen is readily adsorbed there. Magnetic field is likely to intensify the abrasive action by wear particles and mitigate wear of the plate specimen. It is postulated that all these effects are caused by the influence of magnetic field on the electrical charge of the worn surface created on Si3N4 ball.
1 August 2006 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Three novel ideas for self-lift generation between contacting surfaces are presented and discussed. They are based on well-established fundamental principles and include squeeze film action, surface contraction, and acoustic levitation. Embodiment of concepts is described and the arrangement of piezo-actuators used to induce a squeeze film action is shown. Experimental verification of the prototype devices made in accordance with the proposed concepts was carried out. Results confirmed that experimentally tested concepts are feasible and could be practically implemented in mechanical devices.
3 January 2014 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
In this study, fundamental aspects and mechanisms of acoustic levitation together with governing equations are presented first. Then, the acoustic levitation phenomenon is considered as a new way to design air suspension systems capable of self-levitation. A particular emphasis is laid on journal bearings and their specific geometrical configuration. A practical feasibility of using acoustic levitation to separate contacting surfaces is supported and illustrated by results of experimental testing of a number of prototype devices.