Online monitoring of carbon fiber reinforced plastic (CFRP) ropes requires non-destructive testing (NDT) methods capable of detecting multiple damage types at high inspection speeds. Three NDT methods are evaluated on artificial and realistic imperfections in order to assess their suitability for online monitoring of CFRP ropes. To support testing, the microstructure and electrical conductivity of a carbon fiber rope is characterized. The compared methods are thermography via thermoelastic stress analysis, ultrasonic testing with commercial phased array transducers, and eddy current testing, supported by tailor-made probes. While thermoelastic stress analysis and ultrasonics proved to be accurate methods for detecting damage size and the shape of defects, they were found to be unsuitable for high-speed inspection of a CFRP rope. Instead, contactless inspection using eddy currents is a promising solution for real-time online monitoring of CFRP ropes at high inspection speeds.
A multiscale modelling approach was developed in order to estimate the effect of defects on the strength of unidirectional carbon fiber composites. The work encompasses a micromechanics approach, where the known reinforcement and matrix properties are experimentally verified and a 3D finite element model is meshed directly from micrographs. Boundary conditions for loading the micromechanical model are derived from macroscale finite element simulations of the component in question. Using a microscale model based on the actual microstructure, material parameters and load case allows realistic estimation of the effect of a defect. The modelling approach was tested with a unidirectional carbon fiber composite beam, from which the micromechanical model was created and experimentally validated. The effect of porosity was simulated using a resin-rich area in the microstructure and the results were compared to experimental work on samples containing pores.
The ability to accurately determine elastic properties of orthotropic materials is important in the design and health assessment of composite structures. Direct methods using strain gauges and extensometers for estimating orthotropic properties have become popular in recent years. In cases where strains are highly localized, the material properties are inhomogeneous, or the material has localized damage, the use of these measurement schemes often provides insufficient information. To address this, we propose an inverse method, based on quasi-static elasticity imaging (QSEI) for determining inhomogeneous orthotropic elastic properties using distributed displacement measurements obtained from digital image correlation (DIC). The QSEI-based approach is first tested with simulated noisy displacement data considering in-plane deformations of plate geometries undergoing stretching and bending. Following this, experimental DIC measurements are applied to test the feasibility of the QSEI-based approach. Elastic properties of uni-directional CFRP beams with and without localized damage are estimated using the proposed approach. Results demonstrate the feasibility of the proposed inverse approach.
21 August 2017 in Journal of Nondestructive Evaluation