Biomass-derived carbonaceous constituents constitute fascinating green technology for electrochemical energy-storage devices. In light of this, interconnected mesoporous graphitic carbon nanoflakes were synthesized by utilizing waste green-tea powders through the sequential steps of air-assisted carbonization, followed by potassium hydroxide activation and water treatment. Green-tea waste-derived graphitic carbon displays an interconnected network of aggregated mesoporous nanoflakes. When using the mesoporous graphitic carbon nanoflakes as an anode material for the lithium-ion battery, an initial capacity of ~706 mAh/g and a reversible discharge capacity of ~400 mAh/g are achieved. Furthermore, the device sustains a large coulombic efficiency up to 96% during 100 operation cycles under the applied current density of 0.1 A/g. These findings depict that the bio-generated mesoporous graphitic carbon nanoflakes could be effectively utilized as a high-quality anode material in lithium-ion battery devices.

The nanocomposites of activated-carbon-decorated silicon nanocrystals (ACAC) were synchronously derived in a single step from biomass rice husks, through the simple route of the calcination method together with the magnesiothermic reduction process. The final product, ACAC, exhibited an aggregated structure of activated-carbon-encapsulated nanocrystalline silicon spheres, and reveals a high specific surface area (498.5 m²/g). Owing to the mutualization of advantages from both silicon nanocrystals (i.e., low discharge potential and high specific capacity) and activated carbon (i.e., high porosity and good electrical conductivity), the ACAC nanocomposites are able to play a substantial role as an anodic source material for the lithium-ion battery (LIB). Namely, a high coulombic efficiency (97.5%), a high discharge capacity (716 mAh/g), and a high reversible specific capacity (429 mAh/g after 100 cycles) were accomplished when using ACAC as an LIB anode. The results advocate that the simultaneous synthesis of biomass-derived ACAC is beneficial for green energy-storage device applications.

This article reviews the latest advancements in perovskite solar cell (PSC) components for innovative photovoltaic applications. Perovskite materials have emerged as promising candidates for next-generation solar cells due to their exceptional light-absorbing capabilities and facile fabrication processes. However, limitations in their stability, scalability, and efficiency have hindered their widespread adoption. This review systematically explores recent breakthroughs in PSC components, focusing on absorbed layer engineering, electron and hole transport layers, and interface materials. In particular, it discusses novel perovskite compositions, crystal structures, and manufacturing techniques that enhance stability and scalability. Additionally, the review evaluates strategies to improve charge carrier mobility, reduce recombination, and address environmental considerations. Emphasis is placed on scalable manufacturing methods suitable for large-scale integration into existing infrastructure. This comprehensive review thus provides researchers, engineers, and policymakers with the key information needed to motivate the further advancements required for the transformative integration of PSCs into global energy production.

The low-power, high-performance graphene/ZnO Schottky photodiodes were demonstrated through the direct sputter-growth of ZnO onto the thermally-cleaned graphene/SiO₂/Si substrate at room temperature. Prior to the growth of ZnO, a thermal treatment of the graphene surface was performed at 280 °C for 10 min in a vacuum to desorb chemical residues that may serve as trap sites at the interface between graphene and ZnO. The device clearly showed a rectifying behavior with the Schottky barrier of ≈0.61 eV and an ideality factor of 1.16. Under UV illumination, the device exhibited the excellent photoresponse characteristics in both forward and reverse bias regions. When illuminating UV light with the optical power density of 0.62 mW/cm², the device revealed a high on/off current ratio of >10³ even at a low bias voltage of 0.1 V. For the transient characteristics upon switching of UV light pulses, the device represented a fast and stable photoresponse (i.e., rise time: 0.16 s, decay time: 0.19 s). From the temperature-dependent current–voltage characteristics, such an outstanding photoresponse characteristic was found to arise from the enhanced Schottky barrier homogeneity via the thermal treatment of the graphene surface. The results suggest that the ZnO/graphene Schottky diode holds promise for the application in high-performance low-power UV photodetectors.