Many designs of anchor cables are currently in use for rock support in civil and mining operations. Because of the exposed surface and weak shear performance of the cable bolt’s free section (CBFS) in end-anchored structures, breaking failure frequently occurs. Numerical simulations and laboratory experiments were performed in this study to develop measures to improve CBFS resistance to shear failure. Analysis of shear characteristics of the CBFS showed that higher axial tension weakens the cable bolt’s shear resistance, and that shear damage on the cable surface and uneven distribution of shear stress aggravate CBFS tensile–shear failure. A high-strength steel pipe is proposed to protect the shear cable bolt, and the preliminary design of a CBFS-strengthening device (CFSD) is presented. Numerical simulation revealed that the CFSD effectively improved CBFS shear resistance and provided protection from harmful shear damage. The optimal performance of a Q-type (slotted steel pipe) CFSD was confirmed. The mechanism of improvement of the cable’s shear resistance to surrounding rock by employing the CFSD was analyzed. Double-shear tests were carried out on a bare cable bolt and a cable bolt with a Q-CFSD. The results revealed that the CFSD increased the peak shear force on the joint plane, cable peak axial force, and ultimate shear displacement by 31%, 18%, and 11%, respectively. The proposed device is effective in improving the shear performance of end-anchored cable bolts and enhancing surrounding rock stability.
Longitudinal connected fissures in a shallowly buried coal face with thin bedrock are the main factor causing sand‐burst accidents, water‐burst accidents, and abnormal increases in water inflow. To understand the evolution of longitudinal connected fissures and propose method for controlling such fissures, 3‐1 Coal of the Jinjie Coal Mine in Shendong Coal Group, China, was used as a case study. Physical simulation, numerical simulation, field measurements, and other measures were carried out to analyze thoroughly the opening and closure of fissures. At the same time, the stage characteristics of fissures evolution process are also obtained. The results indicate that when periodic weighting occurs, a longitudinal connected fissure starts to open. As the coal face moves on, the fissure expands gradually with the dynamic changes in horizontal force and rock dislocation; when the expansion reaches its limit, the key rock falls and the longitudinal connected fissure rapidly closes. With the advent of the next periodic weighting, the longitudinal connected fissure compacts further and the next longitudinal connected fissure appears. The formation of longitudinal connected fissures is described with reference to three factors: the advancement speed of the coal face, the holding power of the hydraulic support, and the filling degree of the goaf area, all of which can be easily controlled by engineering means. This study provides a basis for control of sand‐burst accidents, water‐burst accidents, and abnormal increase in water inflow in a shallow coal face with thin bedrock.