Electrochromic materials have been considered as a new way to achieve energy savings in the building sector due to their potential applications in smart windows, cars, aircrafts, etc. However, the high cost of manufacturing ECDs using the conventional manufacturing methods has limited its commercialization. It is the advantages of low cost as well as resource saving, green environment protection, flexibility and large area production that make printing electronic technology fit for manufacturing electrochromic devices. This paper reviews the progress of research on printed electrochromic devices (ECDs), detailing the preparation of ECDs by screen printing, inkjet printing and 3D printing, using the scientific properties of discrete definition printing method. Up to now, screen printing holds the largest share in the electrochromic industry due to its low cost and large ink output nature, which makes it suitable especially for printing on large surfaces. Though inkjet printing has the advantages of high precision and the highest coloration efficiency (CE) can be up to 542 ± 10 cm2C–1, it has developed smoothly, and has not shown rigid needs. Inkjet printing is suitable for the personalized printing production of high precision and small batch electronic devices. Since 3D printing is a new manufacturing technology in the 21st century, with the characteristics of integrated molding and being highly controllable, which make it suitable for customized printing of complex devices, such as all kinds of sensors, it has gained increasing attention in the past decade. Finally, the possibility of combining screen printing with inkjet printing to produce high performance ECDs is discussed.
Tungsten trioxide (WO3) is used to prepare the important electrochromic layer of the electrochromic device as a wide bandgap semiconductor material. In this study, WO3 electrochromic film was successfully prepared by screen printing. To modify the thixotropy and wettability of the ink, polyvinyl alcohol (PVA) and 2-perfluoroalkyl ethanol (FSO) were added in the ammonium meta-tungstate (AMT) solution. We found that the PVA additive could improve the dynamic viscosity of the solution and modify the uniformity of the film. 2-Perfluoroalkyl ethanol (FSO) could lower the surface tension and increase the wettability of the AMT solution on the substrate. By observing the morphology of the printed films, the ink formulas for screen printing were selected. We found the annealing process could help remove PVA. Through characterization of electrochromic performance, it was found that the best performing device had 42.57% modulation and 93.25 cm2·C−1 coloration efficiency (CE) for 600 nm light. This study showed great potential in the preparation of WO3 electrochromic devices by a low-cost screen-printing method.
For making full use of the discoloration function of electrochromic (EC) devices and better show the charge and discharge states of supercapacitors (SCs), electrochromic supercapacitors (ECSCs) have attracted much attention and expectations in recent years. The research progress of tungsten-oxide-based electrochromic supercapacitors (ECSCs) in recent years is reviewed in this paper. Nanostructured tungsten oxide is widely used to facilitate ion implantation/extraction and increase the porosity of the electrode. The low-dimensional nanostructured tungsten oxide was compared in four respects: material scale, electrode life, coloring efficiency, and specific capacitance. Due to the mechanics and ductility of nano-tungsten oxide electrodes, they are very suitable for the preparation of flexible ECSCs. With the application of an organic protective layer and metal nanowire conductive electrode, the device has higher coloring efficiency and a lower activation voltage. Finally, this paper indicates that in the future, WO3-based ECSCs will develop in the direction of self-supporting power supply to meet the needs of use.
Electrochromic devices have demonstrated considerable potential in a range of applications, including smart windows and automotive rearview mirrors. However, traditional cycle life testing methods are time-consuming and require significant resources to process a substantial amount of generated data, which presents a significant challenge and remains an urgent issue to be addressed. To address this challenge, we proposed the use of Long Short-Term Memory (LSTM) networks to construct a prediction model of the cycle life of electrochromic devices and introduced an interpretable analysis method to further analyze the model’s predictive capabilities. The original dataset used for modeling was derived from preliminary experiments conducted under 1000 cycles of six devices prepared with varying mixing ratios of heavy water (D2O). Furthermore, validation experiments confirmed the feasibility of the D2O mixing strategy, with 83% of the devices exhibiting a high initial transmittance modulation amplitude (ΔT = 43.95%), a rapid response time (tc = 7 s and tb = 8 s), and excellent cyclic stability (ΔT = 44.92% after 1000 cycles). This study is the first to use machine learning techniques to predict the cycle life of electrochromic devices while proposing performance enhancement and experimental time savings for inorganic all-liquid electrochromic devices.