Construction materials have a direct impact on the environment, on people, and their health. In addition, building insulation plays a decisive role in terms of energy consumption of buildings and regarding CO₂-emissions over their whole life cycle. In order to achieve a holistic concept for green building worldwide, it is necessary to develop ecological insulating materials and to scientifically examine them in terms of their technical properties, as done with particleboards from agricultural waste presented in this article. This study aims to characterize the properties’ tensile and compressive strength, modulus of rupture (MOR), and elasticity (MOE) and thermal conductivity of particleboards affected by parameters, such as waste type (rice straw or flax shives), particleboard density, resin type, and content, as well as the use of treated rice straw. Particleboards made from flax shives had superior properties compared to the rice straw particles. The mechanical properties of the boards increase with an increasing resin content, except for the MOR and MOE, which decrease with an increasing resin content, and reach their peak value at a resin content of 10%.

Global urbanization is advancing, and with it, the densification of cities. Due to increased sealing of open spaces and the re-densification of existing urban settings, green spaces in the city are becoming scarcer. At the same time, greening within the urban fabric is known for its positive effects on the environment and decisively counteracts the urban heat effect. This study deals with the benefits of green façades for the environment as a cooling measure. Two façade greening systems, one trough and one cassette system, consisting of curtain wall elements with a basic metal structure, installed at a south-facing outdoor wall of a school building in Vienna, Austria, were taken under metrological examination. In order to evaluate the cooling effect caused by evapotranspiration, the amount of water evaporated was calculated using the difference of inflow and outflow. Furthermore, the surface temperatures of the greened and non-greened walls were measured to display the influence of the interaction of shading and evapotranspiration on the surrounding microclimate. The investigated vertical greening system with an area of 58 m² has an average evaporation capacity of 101.38 L per day in the summer. The maximum surface temperature difference was measured to be 11.6 °C.

Humans spend more than 80% of their lives indoors resulting in an increased demand for high indoor air quality (IAQ). At the same time, indoor air tends to be at least twice as polluted as outdoor air, and health threats caused by long-term exposure to indoor air pollution are rising. Few experiments under real-life conditions have demonstrated positive effects of indoor plants on parameters related to IAQ, resulting in improved humidity and temperature, reduced particulate matter concentration and CO₂ levels. Indoor living walls allow the presence of many plants—without taking up valuable floor area. This article presents the results of conducted measurements on four do-it-yourself green walls planted with different plant species that are typically used for vertical indoor greenery (golden pothos, Boston fern, spider plant and a combination of plants) in a school setting. Besides the parameters of air humidity and temperature, CO₂, mold spore and particulate matter levels, influences on room acoustics were investigated. Based on a custom-developed evaluation matrix, the plants were compared with each other and a reference without plants. The results show that no species led to deterioration of IAQ. Golden pothos had the most substantial effect and delivered improvements in all examined parameters.

Façade greening at the intersection between buildings and urban space offers an optimal opportunity to integrate greenery into increasingly dense cities and influence the microclimate and contribute to high quality of life in urban areas. Despite proven numerous positive effects, there is still a lack of implementation and practical relevance is low until now. To integrate existing greening systems directly into future planning processes and thus keep up with the advancing digitalization in the building sector, an integration of these systems into Building Information Modeling (BIM) is urgently needed and in connection to this, the implementation of an automated planning process to support easier realization of greening projects contributing to a sustainable urban development. Therefore, BIM objects were created for five façade greening systems after analyzing the necessary basic data. Subsequently, an automated process was used to optimize the time-consuming conventional planning process of façade greening, with the aim of evaluating the simulated greening variants based on defined parameters. A case study presents the application of the prototypes and the possible calculations over the life cycle of the building. This development holds great potential by simplifying the process of decision-making and placing façade greenery on buildings.

According to demographic data, the percentage of elderly people within the population is growing, representing a vulnerable group to the effects of increasing heat, but little attention has been paid to developed adaptation measures. In addition, many older people leave their familiar homes and live in nursing homes. The person-centred care pursues creating spaces of high living quality for these people in nursing homes, to which plants and greenery can contribute. Greening is also considered an effective climate change adaptation measure. To create healthy conditions for this vulnerable group of elderly, both technical and social factors must be considered, and accordingly, a successful solution can only be achieved in an interdisciplinary way. The research and development of the project “Green: Cool & Care” dealt with this outset from a building physics, social, and nursing science perspective, and concepts to integrate greening measures in nursing homes were developed jointly by researchers, planners, staff, volunteers, and residents. For this purpose, measurement campaigns of air quality parameters, individual interviews and focus groups, as well as co-creative workshops were conducted aiming to include the objective building conditions as well as the subjective needs in developing and, in a further step, implementing greening measures.

Low indoor humidity has been shown to influence the transmission of respiratory diseases via air. A certain proportion of sick leave in offices is therefore attributable to dryness of air. An improvement in these conditions thus means a reduction in sick leave, which is accompanied by cost savings for companies. Vertical indoor greening has a verifiable positive effect on air humidity, especially in winter months. In this article, the correlation between improved air humidity in greened rooms and reduction of sick leave due to improved air humidity was described. The resulting indirect economic effect was determined by comparing the costs for construction, green care, and technical maintenance of indoor greenery with savings due to lower sick leave. Based on long-term measurement data on air humidity and temperature, and actual cost values for three buildings, located in Vienna, Austria, with 6 greened and 3 reference rooms without greenery, the correlation of the method was derived and finally formulated in a generalized way using dimensioning factors. Only considering the influence on air humidity, profitability of 6.6 m² vertical greening installed in an example office with six workplaces equipped with technical ventilation and saving of two sick days already results after about 4.5 years.