The effect of high hydrostatic pressure (HHP) treatment on dried soybean, adzuki bean, and kintoki kidney bean, which are low-moisture-content cellular biological materials, was investigated from the viewpoint of water absorption. The samples were vacuum-packed with distilled water and pressurized at 200 MPa and 25 °C for 10 min. After the HHP treatment, time courses of the moisture contents of the samples were measured, and the dimensionless moisture contents were estimated. Water absorption in the case of soybean could be fitted well by a simple water diffusion model. High pressures were found to have negligible effects on water absorption into the cotyledon of soybean and kintoki kidney bean. A non-linear least square method based on the Weibull equation was applied for the adzuki beans, and the effective water diffusion coefficient was found to increase significantly from 8.6 × 10−13 to 6.7 × 10−10 m2/s after HHP treatment. Approximately 30% of the testa of the adzuki bean was damaged upon HHP treatment, which was comparable to the surface area of the testa in the partially peeled adzuki bean sample. Thus, HHP was confirmed to promote mass transfer to the cotyledon of legumes with a tight testa.
The degradation of fish gelatin using hot-compressed water was investigated. The hot-compressed water treatment resulted in the degradation of fish gelatin into peptides, and the number of the peptides increased with increasing the temperature. The distribution of amino acids in the product mixture indicated that hot-compressed water treatment at 240°C resulted in a high level of amino acid degradation, and the highest concentrations of free amino acids was at 220°C. Lysinoalanine, which is toxic, was rarely generated by hot-compressed water treatment at higher temperature range. Additionally, the optimum temperature for the hot-compressed water treatment with respect to the angiotensin I-converting enzyme inhibitory was at 180°C. These analyses demonstrate that the degradation of fish gelatin with hot-compressed water could be used to generate functional materials.
We investigated the effect of high hydrostatic pressure (HHP) on the distribution of free amino acids and isoflavones in soybean immediately after pressure treatment (100–600 MPa, 10–60 min). HHP-treatment at 200 and 300 MPa resulted in high accumulation of free amino acids. Additionally, Gly, Val, and Pro levels increased even after HHP of 400 MPa. The application of HHP-treatment to soybean decreased sources of an astringent taste such as genistein-, daizein-, and glycitein-type molecules under all pressure conditions over 200 MPa. High accumulation of free amino acids with specific pressure–time conditions would be caused by the acceleration of proteolysis and specific amino acid metabolism. We concluded that HHP alone with no subsequent storage enabled the enrichment of specific amino acids such as GABA, Glu, Lys, and Pro in soybean. Soybean with enrichment of these amino acids and improved taste should be an innovative component of functional foods.
The effects of high hydrostatic pressure (HHP) on the physicochemical properties of high-β-glucan barley flour were investigated in the present study. Dough samples were made from two types of barley flour with low and high β-glucan content, respectively, and treated with HHP (200–600 MPa) for 10 min. Although the elevation of pasting properties for the samples treated at 600 MPa was reduced to the same extent as that in wheat flour at normal atmospheric pressure, β-glucan content was maintained regardless of the pressure applied. The significant increase in starch damage of the dough samples at 550 and 600 MPa was confirmed by the results of microscopic observation, which revealed that elliptical starch granules were cracked and damaged in samples with low β-glucan at 600 MPa, and in samples with high β-glucan content at 400 MPa or more. X-ray diffraction patterns of the samples treated at 600 MPa indicated the formation of amylose-lipid complexes that were considered to inhibit the elevation of viscosity.
The physiological implications of autophagy in plant cells have not been fully elucidated. Therefore, we investigated the consequences of autophagy in the moss Physcomitrella by measuring biochemical parameters (fresh and dry weights; starch, amino acid, carbohydrate, and NH3 content) in wild-type (WT) and autophagy-deficient atg5Physcomitrella cells. We found higher starch levels and a higher net starch synthesis rate in WT cells than in atg5 cells cultured in a glucose-containing culture medium, whereas net starch degradation was similar in the two strains cultured in a glucose-deficient culture medium. Additionally, the treatment of cells with the autophagy inhibitor 3-methyladenine suppressed starch synthesis. Loading bovine serum albumin into atg5 cells through endocytosis, i.e., supplying proteins to vacuoles in the same way as through autophagy, accelerated starch synthesis, whereas loading glutamine through the plasma membrane had no such effect, suggesting that Physcomitrella cells distinguish between different amino acid supply pathways. After net starch synthesis, NH3 levels increased in WT cells, although the change in total amino acid content did not differ between WT and atg5 cells, indicating that autophagy-produced amino acids are oxidized rapidly. We conclude that autophagy promotes starch synthesis in Physcomitrella by supplying the energy obtained by oxidizing autophagy-produced amino acids.
The effects of high hydrostatic pressure (HHP) treatment (100–600 MPa for 10–60 min) and thermal treatment (boiling for 10–60 min) on oligosaccharides, pinitol, and soyasapogenol A as taste ingredients in soybean (Glycine max (L.) Merr.) (cv. Yukihomare) were evaluated. Additionally, soybean-derived fatty acids such as α-linolenic acid, linoleic acid, oleic acid, palmitic acid, and stearic acid in pressurized soybeans were quantitatively analyzed. Sucrose, stachyose, and raffinose concentrations were decreased in all tested pressure and time combinations; however, pinitol concentrations were increased by specific pressure and time combinations at 100–400 MPa for 10–60 min. While the soyasapogenol A content in boiled soybeans decreased with increasing boiling time, that of pressurized soybeans was altered by specific pressure and time combinations. At the lower pressure and shorter time combinations, the essential fatty acids such as α-linolenic acid and linoleic acid showed higher contents. Stearic acid and oleic acid contents of pressurized soybeans increased at mild pressure levels (300–500 MPa). In contrast, the combination of higher pressure and longer time results in lower essential fatty acid contents. Non-thermal-pressurized soybeans have the potential to be a high-value food source with better taste due to the enrichment of low molecular weight components such as pinitol, free amino acids, and the reduction of isoflavones and Group A soyasapogenol.