Coherent beam combining of 107 beams has been demonstrated for the first time to the best of our knowledge. When the system was in closed loop, the pattern in far-field was stable and the fringe contrast was > 96 % . The impact of the dynamic tilt error, the piston error, and power inconsistency was theoretically analyzed. Meanwhile, the distribution law of dynamic tilt error was estimated and the correlation of the tilt dithering of different axis was analyzed statistically. The ratio of power in the central lobe was ∼ 22.5 % . The phase residue error in the closed loop was ∼ λ / 22 , which was evaluated by the root-mean-square error of the signal generated from the photoelectric detector.

Hydrogels are generally thought to be formed by nano- to micrometre-scale fibres or polymer chains, either physically branched or entangled with each other to trap water. Although there are also anisotropic hydrogels with apparently ordered structures, they are essentially polymer fibre/discrete polymer chains-based network without exception. Here we present a type of polymer-free anisotropic lamellar hydrogels composed of 100-nm-thick water layers sandwiched by two bilayer membranes of a self-assembled nonionic surfactant, hexadecylglyceryl maleate. The hydrogels appear iridescent as a result of Bragg’s reflection of visible light from the periodic lamellar plane. The particular lamellar hydrogel with extremely wide water spacing was used as a soft two-dimensional template to synthesize single-crystalline nanosheets in the confined two-dimensional space. As a consequence, flexible, ultrathin and large area single-crystalline gold membranes with atomically flat surface were produced in the hydrogel. The optical and electrical properties were detected on a single gold membrane.

Circular dichroism (CD) studies on single nanostructures can yield novel insights into chiroptical physics that are not available from traditional ensemble-based measurements, yet they are challenging because of their weak signals. By introducing an oblique excitation beam, we demonstrate the observation and spectroscopic analysis of a prominent plasmonic chiroptical response from a single v-shaped gold nanorod dimer nanostructure. We show that circular differential scattering from the obliquely excited gold nanorod dimer yields a characteristic bisignate peak-dip spectral shape at hybridized energies of the dimer. This chiroptical response can be ascribed to extrinsic chirality which depends on the geometry configurations of the chiral arrangement. Due to strong near-field coupling, the dipole orientations of the hybridized resonance modes can be in favor of the incident circularly polarized light where a maximum g-factor of ∼0.4 is observed. Promising applications of this chiroptical arrangement as a key component can be in electronics, photonics, or metamaterials.

High-power mode-programmable orbital angular momentum (OAM) beams have received substantial attention in recent years. They are widely used in optical communication, nonlinear frequency conversion, and laser processing. To overcome the power limitation of a single beam, coherent beam combining (CBC) of laser arrays is used. However, in specific CBC systems used to generate structured light with a complex wavefront, eliminating phase noise and realizing flexible phase modulation proved to be difficult challenges. In this paper, we propose and demonstrate a two-stage phase control method that can generate OAM beams with different topological charges from a CBC system. During the phase control process, the phase errors are preliminarily compensated by a deep-learning (DL) network, and further eliminated by an optimization algorithm. Moreover, by modulating the expected relative phase vector and cost function, all-electronic flexible programmable switching of the OAM mode is realized. Results indicate that the proposed method combines the characteristics of DL for undesired convergent phase avoidance and the advantages of the optimization algorithm for accuracy improvement, thereby ensuring the high mode purity of the generated OAM beams. This work could provide a valuable reference for future implementation of high-power, fast switchable structured light generation and manipulation.

The random distributed-feedback Raman fiber laser (RRFL) is a new approach to obtain a high-power laser. In this Letter, we report a RRFL with quasi-kilowatt output power for the first time based on a half-open cavity. It consists of a piece of a large-mode-area passive fiber with a core diameter of 20 μm and a high-reflectivity fiber Bragg grating (FBG). By optimizing the fiber length to be 90 m, a 919 W random laser at 1150 nm is achieved in the forward output end. Due to the nonlinear Kerr-effect-induced spectral broadening, the spectrum of the generated random laser exceeds the bandwidth of the FBG, resulting in a 66 W random laser emitting from the backward direction at the maximum power. To the best of our knowledge, it is the first quasi-kilowatt random fiber laser, and it is also the highest power reported of a 1150 nm laser. This work provides a rather simple structure to obtain a kilowatt-level, stable random laser output.