Zinc oxide (ZnO) nanorods has attractive properties for nanoscale optoelectronic applications, such as optical sensors, ultraviolet laser diodes, and photodetectors. ZnO nanorods, can be fabricated by simple and low cost chemical approach, such as hydrothermal method. In this method, the morphology, microstructure, optical and electrical properties of ZnO nanorods are highly determined by process parameters such as solvent, deposition time, deposition temperature as well as annealing condition. In this paper we report the fabrication of ZnO nanorods that were grown on transparent conducting indium tin oxide coated glass substrates. Initially, ZnO seed layers were deposited on heated substrates with temperature of 450 °C using ultrasonic spray pyrolysis method with frequency of 1.7 MHz and then grown by hydrothermal method with three different precursor concentrations, namely 0.02 M, 0.06 M, and 0.1 M. The surface morphology and structure were investigated by field emission scanning electron microscope (FESEM) and x-ray diffraction (XRD), while the optical properties were observed by photoluminescence (PL) and and UV VIS reflectance spectroscopy.
1 November 2019 in IOP Conference Series: Materials Science and Engineering
Utilization of topological nanostructure such as magnetic domain wall (DW) as a future generation of non-volatile memory as racetrack memory has been attracted more researchers due to potential to achieve higher speed of data read/writing and capacity. However, completed understanding of DW dynamics was still need to be improved by advanced analysis from the theoretical/simulation or experimental methods. In this study, the effect of geometrical notch dept on domain wall depinning in Permalloy (Py) nanowires by micromagnetic simulation method have been investigated. The varied double notch dept from 10 to 90 nm in 200 nm of wire width were used and the transverse type DW was triggered by nanosecond current pulse to observe the critical depinning current (Jd). It is observed that the depinning current was increased as the notch dept increases. However, the magnitude of Jd have a maximum values for all notch length variation. The increasing of notch length has shifted the maximum Jd to the larger notch dept values. This behavior indicated that the optimum notch design was needed to obtain higher speed and lower depinning energy in the development of domain wall based devices.
We have systematically investigated the ground state domain structure transition on magnetite (Fe3O4) material using micromagnetic simulation. A spherical model of magnetite nanoparticle was simulated with varied diameter size from 40 nm to 100 nm. It is observed that the domain structure transition from single domain to multi-domain occurred between 68 nm and 69 nm. The changing of domain structure is followed by changing the magnetization energy. For a single domain particle, it is observed that the demagnetization energy is dominant to exchange energy while the opposite occurs in multi-domain particle. Then, we have also calculated the critical diameter based on Brown and Kittel formulas. Comparing to the formulas, our micromagnetic results are in the range between Brown and Kittel prediction, which are 62.9 nm and 83 nm, respectively. Therefore, the observed domain structure substitution from single to multi domain structure in this study is related to the critical diameter, which the magnetization energy system changed.
Herein, we report the dynamic susceptibility spectra of ferromagnetic spheres with diameters varying from 50 to 100 nm determined via micromagnetic simulations. The dynamic susceptibility spectra were calculated based on magnetization and the external field response in the frequency domain using Fourier transforms. The peak of the imaginary part of the dynamic susceptibility spectra, which indicates the resonance frequency of the ferromagnetic material, is interestingly near Kittel's resonance frequency.