Low altitude, small radar cross-section (RCS), and slow speed (LSS) targets, for example small unmanned aerial vehicles (UAVs), have become increasingly significant. In this paper, we propose a new automatic target recognition (ATR) system and a complete ATR chain based on multi-dimensional features and multi-layer classifier system using L-band holographic staring radar. We consider all steps of the processing required to make a classification decision out of the raw radar data, mainly including preprocessing for the raw measured Doppler data including regularization and main frequency alignment, selection, and extraction of effective features in three dimensions of RCS, micro-Doppler, and motion, and multi-layer classifier system design. We design creatively a multi-layer classifier system based on directed acyclic graph. Helicopters, small fixed-wing, and rotary-wing UAVs, as well as birds are considered for classification, and the measured data collected by L-band radar demonstrates the effectiveness of the proposed complete ATR classification system. The results show that the ATR classification system based on multi-dimensional features and k-nearest neighbors (KNN) classifier is the best, compared with support vector machine (SVM) and back propagation (BP) neural networks, providing the capability of correct classification with a probability of around 97.62%.

This paper investigates a subarray based algorithm for direction of arrival (DOA) estimation of wideband uniform linear array (ULA), under the presence of frequency-dependent mutual coupling effects. Based on the Toeplitz structure of mutual coupling matrices, the whole array is divided into the middle subarray and the auxiliary subarray. Then two-sided correlation transformation is applied to the correlation matrix of the middle subarray instead of the whole array. In this way, the mutual coupling effects can be eliminated. Finally, the multiple signal classification (MUSIC) method is utilized to derive the DOAs. For the condition when the blind angles exist, we refine DOA estimation by using a simple approach based on the frequency-dependent mutual coupling matrixes (MCMs). The proposed method can achieve high estimation accuracy without any calibration sources. It has a low computational complexity because iterative processing is not required. Simulation results validate the effectiveness and feasibility of the proposed algorithm.

In this paper, we propose a novel direction of arrival (DOA) estimation method for wideband signals with sensor arrays. The proposed method splits the wideband array output into multiple frequency sub-channels and estimates the signal parameters using a digital channelization receiver. Based on the output sub-channels, a channelization-based incoherent signal subspace method (Channelization-ISM) and a channelization-based test of orthogonality of projected subspaces method (Channelization-TOPS) are proposed. Channelization-ISM applies narrowband signal subspace methods on each sub-channel independently. Then the arithmetic mean or geometric mean of the estimated DOAs from each sub-channel gives the final result. Channelization-TOPS measures the orthogonality between the signal and the noise subspaces of the output sub-channels to estimate DOAs. The proposed channelization-based method isolates signals in different bandwidths reasonably and improves the output SNR. It outperforms the conventional ISM and TOPS methods on estimation accuracy and dynamic range, especially in real environments. Besides, the parallel processing architecture makes it easy to implement on hardware. A wideband digital array radar (DAR) using direct wideband radio frequency (RF) digitization is presented. Experiments carried out in a microwave anechoic chamber with the wideband DAR are presented to demonstrate the performance. The results verify the effectiveness of the proposed method.