High-speed (HS) electrical machines provide high system efficiency, compact design, and low material consumption. Active magnetic bearings (AMBs) bring additional benefits to the HS system, such as elimination of the friction losses, reduced wear and maintenance, and a built-in monitoring system. HS drivetrains are usually designed for specific applications and require a high level of integration. This paper describes a design method of the HS electrical machine supported by AMBs, considering their mutual influence on the system performance. The optimization procedure, which takes into account both the electrical machine and bearing designs, is developed. The optimization is based on a multiobjective genetic algorithm. The selected optimization parameters include the AMB and machine dimensions. The optimization objectives cover the electrical machine performance and the rotordynamics. The results of the proposed optimization algorithm are implemented in the constructed 350-kW, 15 000-r/min induction machine with a solid rotor supported by AMBs. The prototype tests verify the design and optimization results.

Two-stage oil-free centrifugal air compressors can bring significant advantages and open new market opportunities for compressor manufacturers. One of the core technologies behind this compressor type is the high-speed electrical machine supported by active magnetic bearings. In this paper, the requirements set by the compressor on the electrical machine design are presented. The design solutions aimed to satisfy these requirements are discussed. Two case studies illustrate possible design approaches for the target application with examples of a 120-kW, 60 000-r/min induction machine with a solid rotor and a 225-kW, 50 000-r/min permanent-magnet synchronous machine (PMSM) with a full cylindrical magnet. The system design and simulation results are confirmed by measurements of a PMSM prototype.

A method is presented for tooltip tracking in active magnetic bearing (AMB) spindle applications. The proposed tool tracking approach uses control of the AMB air gap to achieve the desired tool position. A μ-synthesis-based controller is designed for the AMBs with the goal of robustly minimizing the difference between the tool reference and estimated tool position. In such a way, the model-based control approach concurrently addresses the tracking problem and the inability to directly measure real-time tool position in the presence of machining disturbances. To ensure the tractability of the control problem, a model of the desired tracking dynamics is included in the plant. The method is demonstrated on a high-speed AMB boring spindle. To confirm the tool tracking capability, characteristic part geometries are traced including stepped, tapered, and convex profiles. Tool tracking is demonstrated for the rotating AMB spindle in the range of 90 μm. Also, static and dynamic external loading is applied to the spindle tool location to confirm the disturbance rejection ability of the closed-loop system.

The paper reports on the implementation and the design of a controller for a fuel cell blower (FCB) with active magnetic bearings (AMBs). The cascaded position-fluxcentralized controller is comprised of a centralized position control loop and an inner flux control loop. The last one is based on state estimation without explicit flux measurements. As the position control is not dependent on the magnetic field nonlinearities, such a control structure enables operation under a zero bias. The practical working implementation of a flux control for the industrial levitated rotor is shown for the first time. The flux control gives better results than current control for both normal and zero bias operation. The system is analyzed fully, combining rotor dynamics and power amplifier analyses simultaneously. The importance of using the coil voltage in addition to current and practical treatment of the flux control is revealed. The centralized position-flux controller is compared with a state-of-the-art cascaded position-current control, which has inner current control loops. The proposed control solution with a zero bias can achieve a dynamic performance comparable that of a controller with the classical bias current.

Non-contact rotor position sensors are an essential part of control systems in magnetically suspended high-speed drives. In typical active magnetic bearing (AMB) levitated high-speed machine applications, the displacement of the rotor in the mechanical air gap is measured with commercially available eddy current-based displacement sensors. The aim of this paper is to propose a robust and compact three-dimensional position sensor that can measure the rotor displacement of an AMB system in both the radial and axial directions. The paper presents a sensor design utilizing only a single unified sensor stator and a single shared rotor mounted target piece surface to achieve the measurement of all three measurement axes. The sensor uses an inductive measuring principle to sense the air gap between the sensor stator and rotor piece, which makes it robust to surface variations of the sensing target. Combined with the sensor design, a state of the art fully digital signal processing chain utilizing synchronous in-phase and quadrature demodulation is presented. The feasibility of the proposed sensor design is verified in a closed-loop control application utilizing a 350-kW, 15,000-r/min high-speed industrial induction machine with magnetic bearing suspension. The inductive sensor provides an alternative solution to commercial eddy current displacement sensors. It meets the application requirements and has a robust construction utilizing conventional electrical steel lamination stacks and copper winding.