Fully biobased chemically crosslinked anisotropic carboxymethyl cellulose (CMC)/cellulose nanofibril (CNF) aerogels were prepared using an environmentally friendly directional freeze-drying method. The resulting cellulose aerogels were characterized using various techniques. It was found that the CMC/CNF aerogel exhibited a honeycomb structure, and thus possessed anisotropic properties. Moreover, the fully biobased crosslinked organic aerogel possessed excellent mechanical properties based on both compression and three-point bending tests. For instance, it exhibited a remarkable compressive modulus (up to 10 MPa) along the vertical direction (parallel to the freezing direction) as well as a high flexural modulus (up to 54 MPa) perpendicular to the freezing direction. The effects of different aerogel densities and CNF contents on the mechanical properties of CMC/CNF aerogels have been studied. With increasing aerogel density or CNF content, the modulus and strength of the CMC/CNF aerogel increased in both compression and three-point bending tests. In addition, these cellulose aerogels also exhibited relatively low thermal conductivities (<54 mW m−1 K−1). Considering their excellent mechanical properties, very low densities, and the “green” synthesis process, these CMC/CNF aerogels hold great promise for potential industrial applications such as green thermal insulation building materials.
5 February 2019 in Journal of Materials Chemistry A
Two novel COFs are constructed using nonlinear C2-linkers and display excellent properties for metal ion detection and Knoevenagel condensation catalysis.
Five fluorescent labels were synthesized and used in the preparation of polystyrene fluorescent microspheres by the dispersion copolymerization and absorption method. Spectral properties of copolymerization fluorescent microspheres in tetrahydrofuran indicated these individual characteristics of labels should be maintained in the fluorescent microspheres. The differences of the fluorescent spectra between five fluorescent microspheres and their corresponding parent labels in ethanol have been investigated. These fluorescent microspheres were characterized by environmental scanning electron microscopy, laser scanning confocal microscopy and fluorescence spectrophotometry. They exhibited good dispersion and stable and high fluorescence intensity. Furthermore, copolymerization fluorescent microspheres were functionalized with amino groups. This means that a method for the preparation of copolymerization fluorescent microspheres was developed as a platform for the generation of functional fluorescent microspheres for diverse applications.
Although room temperature phosphorescence (RTP) materials have been widely investigated, it is still a great challenge to improve the performance of RTP materials by promoting triplet exciton generation and stabilization. In this study, an in-situ derivation strategy was proposed to construct efficient RTP materials by in-situ deriving guest molecules and forming a rigid matrix during co-pyrolysis of guest molecules and urea. Characterizations and theoretical calculations revealed that the generated derivatives were beneficial for promoting intersystem crossing (ISC) to produce more triplet excitons, while rigid matrix could effectively suppress the non-radiative transition of triplet excitons. Thus, the in-situ derivation strategy was concluded to simultaneously promote the generation and stabilization of triplet excitons. With this method, the ultralong lifetime of RTP materials could reach up to 5.33 s and polychromatic RTP materials were easily achieved. Moreover, the potential applications of the RTP materials in reprocessing or editable anti-counterfeiting were successfully demonstrated.