Realizing full-color emission plays a key role in exploring the luminescence mechanisms of carbon dots (CDots) and promoting the applications of CDots in light-emitting diodes (LEDs). Herein, a synthesis strategy for full-color emitting CDots was developed through the solvothermal reaction of citric acid and urea with a constant mass ratio but varying reactant concentrations in solvent. With the reactant concentrations increasing, a dual regulation mechanism including an enhanced nucleation growth process and subsequently increased CO/CN-related surface states should be responsible for the photoluminescence (PL) shift of CDots from blue to red. Relying on the hydrolyzation and condensation processes of 3-aminopropyltrimethoxysilane, a simple and universal method was developed by chemically dispersing the CDots into a cross-linked silica network on the surface of SiO2 nanoparticles to produce efficient full-color emitting SiO2/CDot composite phosphors with considerable PL quantum yields in the range of 30–60%. It was proved that the full-color emitting SiO2/CDot composite phosphors could be flexibly applied in packaging white LEDs, releasing pure white light at the Commission Internationale de L'Eclairage (CIE) coordinates of (0.33, 0.33) with a color rendering index (CRI) of 80.4 and a high color-rendering white light coming entirely from CDots with the CIE coordinates of (0.34, 0.36) and a CRI of 97.4, indicating promising application of the full-color emitting SiO2/CDot composite phosphors in the LED field.
The optical properties of optical fibers doped with different sizes of PbSe/CdSe core/shell quantum dots (QDs) were theoretically investigated as a function of fiber length, fiber diameter, QD concentration, and pump power. PbSe/CdSe core/shell QD material was confirmed to be a better candidate for the fiber dopant due to enhanced fiber output spectral intensity compared with the performance of plain PbSe QDs. Besides, the stronger size effect depending on fiber size and QD size, and a more obvious Auger recombination effect depending on pump power, were observed for PbSe/CdSe core/shell QD-doped optical fibers. This paper demonstrates a useful method for the emission enhancement of QD-doped optical fibers.
20 August 2023 in Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy
Highly dispersed olive-like NiS particles were synthesized in a liquid-liquid biphasic system at room temperature, where nickel xanthate in organic solvents (toluene and benzene) and sodium sulfide in water solution were used as nickel and sulfide sources, respectively. NiS particles were formed at the stabilized phase interface. The structures, chemical composition and optical characteristics of the products were investigated by transmission electron microscopy, scanning electron microscopy, X-ray photoelectron spectroscopy and ultraviolet-visible spectroscopy. The organic solvents obviously influenced the morphology of the NiS particles. The olive-like NiS with smooth surface and sharp ends was obtained at benzene/water interface, while spindle-like NiS particles with rough surface and circle ends were formed when using toluene as a solvent. Analogously, chainlike Bi2S3 nanowires were produced at chloroform/water interface. The effect of the experiment parameters including reaction time, solvent and concentration of reactants on the size and morphology of the products was discussed in detail and a possible formation mechanism was suggested.