Noise interference during the acquisition of digital images can severely degrade image quality, particularly for images captured under low-light conditions; however, the removal of image noise requires sophisticated digital image processing systems. This study presents a hardware-based solution to real-time image denoising using an existing algorithm designed for the removal of mixed impulse noise (salt-and-pepper and random-valued impulse noise), while preserving image edge details and image borders, without the need for additional computation time or memory capacity. Note that mixed impulse noise is typical of most real-world situations, such as the video noise associated with dashboard cameras. The proposed design was implemented using 180 nm complementary metal-oxide-semiconductor (CMOS) technology, consuming only 21.7 mW when operated at 200 MHz. This operating frequency allows the proposed chip to process noisy video streams with resolution of $1920\mathbf {\times }1080$ at 60 frames per second in real time. In terms of image restoration, the proposed algorithm achieved image quality on par with that achieved using software simulation. We also demonstrated the efficacy of the proposed scheme in denoising noisy video images from a dashboard camera.
27 September 2012 in IEEE Transactions on Consumer Electronics
Orthogonal Frequency-Division Multiplexing (OFDM) systems can efficiently combat the issue of frequency-selective fading channels. Therefore, OFDM has become one of the most popular baseband modulation techniques for wireless communications. This paper presents the design and implementation of a low-power OFDM baseband receiver for wireless local area networks (WLAN). The proposed architecture employs low-power register files and resource-sharing techniques, thus consuming less power than many existing works. The proposed design adopts a number of area-efficient hardware structures to further reduce the hardware cost. Finally, because it is designed using 0.18 μm CMOS technology, the core of the proposed chip has approximately 239K gates, and its power consumption is approximately 36 mW at 20 MHz.
This paper presents a novel pipelined FFT/IFFT processor for OFDM applications. The proposed architecture employs a low-complexity complex multiplier and a constant complex multiplier to eliminate the need of ROM tables, thus consumes lower power than the existing works. Finally, this design spends about 33.6K gates, and the power consumption is about 9.8mW at 20MHz.
Cardiovascular patients consult doctors for advice regarding regular exercise, whereas obese patients must self-manage their weight. Because a system for permanently monitoring and tracking patients’ exercise intensities and workouts is necessary, a system for recognizing gait and estimating walking exercise intensity was proposed. For gait recognition analysis, αβ filters were used to improve the recognition of athletic attitude. Furthermore, empirical mode decomposition (EMD) was used to filter the noise of patients’ attitude to acquire the Fourier transform energy spectrum. Linear discriminant analysis was then applied to this energy spectrum for training and recognition. When the gait or motion was recognized, the walking exercise intensity was estimated. In addition, this study addressed the correlation between inertia and exercise intensity by using the residual function of the EMD and quadratic approximation to filter the effect of the baseline drift integral of the acceleration sensor. The increase in the determination coefficient of the regression equation from 0.55 to 0.81 proved that the accuracy of the method for estimating walking exercise intensity proposed by Kurihara was improved in this study.
In this paper, a novel low-power Viterbi decoder with soft decision is proposed. For the branch metric of the Viterbi decoder, our design employs a soft-decision method to improve its correction capability. In order to find the survivor path efficiently, we modify the classical Viterbi decoding algorithm into a new one. This new algorithm is similar to the register-exchange method with lower latency, but using RAM instead of register banks for recording the output bit-stream of the survivor path. Hence, our design can provide a low-power design. Finally, the chip of this design consumes about 28.6 K gates using TSMC 0.18 μm CMOS technology. The power consumption of our chip is about 19.5 mW at 100 MHz.
The question of how to efficiently implement bit-oriented operations such as convolutional encoding in a word-based processor platform is investigated. Our approach is to treat each word as a vector of individual bits. By reformulating a bit-oriented algorithm in vectorized format, it is shown in this work that significant speed-up of execution of such an algorithm can be achieved. Toward this goal, an efficient code generation design methodology is proposed to leverage the effort of common sub-expression elimination (CSE). The task of efficient vector-oriented code generation then becomes a pattern matching problem. The vectorization approach is demonstrated by the convolutional encoding portion of the IEEE 802.11a (WiFi) standard, implemented in C language on a Sandbridge Technologiescopy Inc. SB3010 baseband processor evaluation board, and more than 90% instruction cycle reduction is observed.