Quantitative microcomputed tomography using synchrotron radiation (SR μCT) was used to assess the effects of a sequential etidronate therapy on both three-dimensional (3D) microarchitecture and degree of mineralization of bone (DMB) in postmenopausal osteoporosis. Thirty-two iliac crest biopsy specimens were taken from 14 patients with osteoporosis (aged 64 ± 1.8 years) before (baseline) and after 1 year of etidronate treatment, and after 2 years of treatment for four of the patients. The samples were imaged at high spatial resolution (voxel size = 10 μm) using the microtomography system developed at the European Synchrotron Radiation Facility (ESRF), Grenoble, France. Three-dimensional microarchitecture parameters were calculated and compared with those obtained from conventional histomorphometry. In addition, the DMB was evaluated also in 3D. No significant statistical changes regarding bone mass and structural parameters were observed in histomorphometry or 3D analyses. The distribution of the DMB in cortical and trabecular bone showed a trend to a shift toward highest mineralization values after 1 year of etidronate treatment (3.88% and 1.24% in cortical and trabecular bone, respectively). This trend was more evident after 2 years. The study also showed that SR μCT is an accurate technique and the only one for quantifying both the mineralization and the microarchitecture of bone samples at the same time in 3D.

Bone microarchitecture and mineralization were determined at three-dimensional synchrotron radiation micro computed tomography in two inbred mice strains. Distal metaphysis of the left femur was imaged in three dimensions at 6.65 microm, whereas the right femur was analyzed with histomorphometry. Three-dimensional quantitative parameters of trabecular and cortical bone architecture were computed. C3H/HeJ@Ico mice had greater bone density and thicker trabeculae; greater cortical bone density, cortical thickness, and porosity; and greater mineralization than did C57BL/6J@Ico mice. The technique is well suited for assessment of trabecular and cortical bone in small animals and at the same time provides mineralization status in three dimensions.

The classical purpose of optical fibres is delivery of either optical power, as for welding, or temporal information, as for telecommunication. Maximum performance in both cases is provided by the use of single-mode optical fibres. However, transmitting spatial information, which necessitates higher-order modes, is difficult because their dispersion relation leads to dephasing and a deterioration of the intensity distribution with propagation distance. Here we consciously exploit the fundamental cause of the beam deterioration—the dispersion relation of the underlying vectorial electromagnetic modes—by their selective excitation using adaptive optics. This allows us to produce output beams of high modal purity, which are well defined in three dimensions. The output beam distribution is even robust against significant bending of the fibre. The utility of this approach is exemplified by the controlled rotational manipulation of live cells in a dual-beam fibre-optical trap integrated into a modular lab-on-chip system.

The random mask encoding technique of multiplexing phase-only filters can be easily adapted to the generation of holographic optical tweezers. The result is a direct, non-iterative and extremely fast algorithm that can be used for computing arbitrary arrays of optical traps. Additional benefits include the possibility of modifying any existing hologram to quickly add more trapping sites and the inexistence of ghost traps or replicas.

In optical tweezers, heating of the sample due to absorption of the laser light is a major concern as temperature plays an important role at microscopic scale. A popular rule of thumb is to consider that, at the typical wavelength of 1064 nm, the focused laser induces a heating rate of B = 1 °C/100 mW. We analysed this effect under different routine experimental conditions and found a remarkable variability in the temperature increase. Importantly, we determined that temperature can easily rise by as much as 4 °C at a relatively low power of 100 mW, for dielectric, non-absorbing particles with certain sets of specific, but common, parameters. Heating was determined from measurements of light momentum changes under drag forces at different powers, which proved to provide precise and robust results in watery buffers. We contrasted the experiments with computer simulations and obtained good agreement. These results suggest that this remarkable heating could be responsible for changes in the sample under study and could lead to serious damage of live specimens. It is therefore advisable to determine the temperature increase in each specific experiment and avoid the use of a universal rule that could inadvertently lead to critical changes in the sample.