Glen Throneberry

Mr. Glen Throneberry


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2020 in Drones
Verified
Journal Article
Open access
PDF file
PLP. Lane
P. Lane
GTGlen Throneberry
Glen Throneberry
IFI. Fernandez
I. Fernandez
Mostafa HassanalianMostafa Hassanalian
Mostafa Hassanalian
RVRui Vasconcellos
Rui Vasconcellos
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
Throughout the last decade, there has been an increased demand for intricate flapping-wing drones with different capabilities than larger drones. The design of flapping-wing drones is focused on endurance and stability, as these are two of the main challenges of these systems. Researchers have recently been turning towards bioinspiration as a way to enhance aerodynamic performance. In this work, the propulsion system of a flapping-wing micro air vehicle is investigated to identify the limitations and drawbacks of specific designs. Each system has a tandem wing configuration inspired by a dragonfly, with wing shapes inspired by a bumblebee. For the design of this flapping-wing, a sizing process is carried out. A number of actuation mechanisms are considered, and two different mechanisms are designed and integrated into a flapping-wing system and compared to one another. The second system is tested using a thrust stand to investigate the impact of wing configurations on aerodynamic force production and the trend of force production from varying flapping frequency. Results present the optimal wing configuration of those tested and that an angle of attack of two degrees yields the greatest force production. A tethered flight test is conducted to examine the stability and aerodynamic capabilities of the drone, and challenges of flapping-wing systems and solutions that can lead to successful flight are presented. Key challenges to the successful design of these systems are weight management, force production, and stability and control.

17 May 2022 in Drones
Verified
Journal Article
Open access
PDF file
GTGlen Throneberry
Glen Throneberry
ATAdam Takeshita
Adam Takeshita
CHChristopher Hocut
Christopher Hocut
FSFangjun Shu
Fangjun Shu
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
In this study, experimental investigations are used to explore the wake propagation and characteristics of a multi-rotor unmanned air vehicle (UAV) in a forward flight mission. Qualitative smoke visualization is used first to gain a qualitative understanding of wake characteristics above and below the body of the multi-rotor UAV which is used as guidance for quantitative particle image velocimetry (PIV) experiments which better resolve the region in the vicinity of the multi-rotor UAV body. The experimental results over a wide range of advance ratios show that as the advance ratio increases, achieved by either lower rotor speeds or higher flight speeds, the distance by which the wake propagates below the UAV is reduced. While above the UAV, the flow returns to the freestream flow closer to the body as the advance ratio increases. Therefore, this study concludes that proximity effects are reduced as the advance ratio increases. Findings from this study can be used to inform in situ sensor placement so that sensor readings are minimally affected by the wake from the multi-rotor UAV. Velocity measurement corrections are provided for sensors mounted above the UAV which can be used to improve sensor data reliability in forward flight. These results can advance autonomous sensing and increase the utility of multi-rotor UAV observations while providing designers and users further guidance to avoid proximity effects.

19 June 2019 in Drones
Verified
Journal Article
Open access
PDF file
GTGlen Throneberry
Glen Throneberry
Mostafa HassanalianMostafa Hassanalian
Mostafa Hassanalian
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
In this work, seven wings inspired from insects’ wings, including those inspired by the bumblebee, cicada, cranefly, fruitfly, hawkmoth, honeybee, and twisted parasite, are patterned and analyzed in FlapSim software in forward and hovering flight modes for two scenarios, namely, similar wingspan (20 cm) and wing surface (0.005 m2). Considering their similar kinematics, the time histories of the aerodynamic forces of lift, thrust, and required mechanical power of the inspired wings are calculated, shown, and compared for both scenarios. The results obtained from FlapSim show that wing shape strongly impacts the performance and aerodynamic characteristics of the chosen seven wings. To study the effects of different geometrical and physical factors including flapping frequency, elevation amplitude, pronation amplitude, stroke-plane angle, flight speed, wing material, and wingspan, several analyses are carried out on the honeybee-inspired shape, which had a 20 cm wingspan. This study can be used to evaluate the efficiency of different bio-inspired wing shapes and may provide a guideline for comparing the performance of flapping wing nano air vehicles with forward flight and hovering capabilities.

21 October 2021 in Drones
Verified
Journal Article
Open access
PDF file
AQAnthony Quintana
Anthony Quintana
RVRui Vasconcellos
Rui Vasconcellos
GTGlen Throneberry
Glen Throneberry
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
Aerial drones have improved significantly over the recent decades with stronger and smaller motors, more powerful propellers, and overall optimization of systems. These improvements have consequently increased top speeds and improved a variety of performance aspects, along with introducing new structural challenges, such as whirl flutter. Whirl flutter is an aeroelastic instability that can be affected by structural or aerodynamic nonlinearities. This instability may affect the prediction of potentially dangerous behaviors. In this work, a nonlinear reduced-order model for a nacelle-rotor system, considering quasi-steady aerodynamics, is implemented. First, a parametric study for the linear system is performed to determine the main aerodynamic and structural characteristics that affect the onset of instability. Multiple polynomial nonlinearities in the two degrees of freedom nacelle-rotor model are tested to simulate possible structural nonlinear effects including symmetric cubic hardening nonlinearities for the pitch and yaw degrees of freedom; purely yaw nonlinearity; purely pitch nonlinearity; and a combination of quadratic, cubic, and fifth-order nonlinearities for both degrees of freedom. Results show that the presence of hardening structural nonlinearities introduces limit cycle oscillations to the system in the post-flutter regime. Moreover, it is demonstrated that the inclusion of quadratic nonlinearity introduces asymmetric oscillations and subcritical behavior, where large and potentially dangerous deformations can be reached before the predicted linear flutter speed.

16 July 2021
Verified
Preprint
Open access
ACAngel Garcia Contreras
Angel Garcia Contreras
GTGlen Throneberry
Glen Throneberry
OOOmeiza Olumoye
Omeiza Olumoye
LVLeobardo Valera
Leobardo Valera
MCMartine Ceberio
Martine Ceberio
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
Humans use mathematical models to describe all sorts of phenomena, one type of model often used to describe phenomena changing over time is dynamical systems. For example, reduced-order to high-fidelity models can be used to describe the time response of systems ranging from pipelines conveying fluids to carbon nanotubes used for biological mass detection. For many real life

16 July 2021
Verified
Preprint
Open access
GTGlen Throneberry
Glen Throneberry
Mostafa HassanalianMostafa Hassanalian
Mostafa Hassanalian
CHChristopher Hocut
Christopher Hocut
Abdessattar AbdelkefiAbdessattar Abdelkefi
Abdessattar Abdelkefi
Although many researchers have invested time into improving the capabilities of flapping wing drones, their low endurance time still limits the applications they can be effectively used for. If the power consumed for flight of these systems could be reduced, their flight times could be improved, increasing the range of applications for which they could be effective. In this study,