The metakaolin-based porous geopolymer were prepared by emulsion templating method with sunflower oil as the template agent. The effects of the type of emulsifiers with different ionic properties, including sodium stearate (SS), polyacrylamide (PAM), and cetyltrimethylammonium bromide (CTAB), which are respectively belonging to anionic, nonionic and cationic emulsifiers, on the paste viscosity, mechanical strength and pore structure of geopolymer were studied. Fourier transform infrared spectroscopy (FTIR) was used to characterize the influence of emulsion template on the geopolymerization. Scanning electron microscope (SEM) and Image-Pro Plus (IPP) software were used to examine the pore structure of geopolymers, including pore size distribution, average size and roundness of pores. Results indicate that geopolymerization is not significantly affected by the incorporation of emulsion template, while the average size, shape and connectivity of pores in geopolymer were significantly influenced by the type of emulsifiers. With the addition of SS, PAM, and CTAB, the average pore size were 18.1, 27.4, and 11.7 μm, respectively, while the control is 18.9 μm. Both the shape regularity and open porosity of pores were increased with SS and PAM, while no significant changes with CTAB. It is promising to make geopolymer with controllable macro pore structure by adjusting the types of emulsifiers in emulsion templating method by adjusting the oil-water interfacial tension and the particle dispersion.
In order to prepare self-supporting faujasite (FAU) zeolite, a self-supporting zeolite block was synthesized in situ by hydrothermal treatment of a metakaolin base geopolymer. The effects of hydrothermal conditions such as hydrothermal alkalinity, temperature and time on the phase composition, microstructure and mechanical strength of the hydrothermal samples were investigated and evidenced by a series of characterization methods such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmet-Teller (BET). The results showed that a self-supporting faujasite block could be obtained by hydrothermal treatment of the geopolymer block in 2 M NaOH solution at 90 °C for 24 h, which had high crystallinity, regular morphology and high compressive strength. The self-supporting zeolite block had a compressive strength of 11.7 MPa, a pore volume of 0.24 cm3/g, and an average pore diameter of 7.86 nm. The specific surface area and the microporous specific surface area of the self-supporting faujasite blocks were 80.36 m2/g and 19.7 m2/g, respectively.