Minghui Yin

Minghui Yin


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2018 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
XTXuesong Tang
Xuesong Tang
MYMinghui Yin
Minghui Yin
CSChun Shen
Chun Shen
Yan XuYan Xu
Yan Xu
Zhaoyang DongZhaoyang Dong
Zhaoyang Dong
YZYun Zou
Yun Zou
With increased wind power penetration in modern power systems, wind turbine generators (WTG) are expected to provide the active power control (APC) for tracking a desired power reference from system or wind farm operators. In practice, the pitch angle control (PAC) and the rotor speed control (RSC) methods can be used for APC in variable-speed variablepitch WTGs, but the latter using turbine inertia as energy buffer is more attractive due to less pitch activation and higher wind energy production. For existing RSC methods, when the rotor speed reaches the upper speed limit at high wind speed or low power reference, they will actually become PAC to follow active power command, which also results in frequent pitch angle manipulation and considerable fatigue on the pitch servo system. To overcome this drawback, this paper proposes a new APC strategy integrating the rotor speed and pitch angle regulation. By utilizing the kinetic energy of rotor inertia at any pitch position (zero as well as non-zero pitch angle), this strategy can effectively avoid frequent action of pitch actuator while sustaining dispatched active power. The proposed method is verified by the fatigue, aerodynamics, structures, and turbulence-based simulations and wind turbine simulator-based experiments.

24 June 2019 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
MKMostafa Kheshti
Mostafa Kheshti
LDLei Ding
Lei Ding
WBWeiyu Bao
Weiyu Bao
MYMinghui Yin
Minghui Yin
QWQiuwei Wu
Qiuwei Wu
VTVladimir Terzija
Vladimir Terzija
Evolving dynamics of modern power systems caused by high penetration of renewable energy sources increased the risk of failures and outages due to declining power system inertia. Large-scale wind farms must participate in frequency control that respond optimally in due time and adaptively in case of detecting power imbalance in the grid. Existing research studies have shown interest on stepwise inertial control (SIC) on wind turbines (WTs). However, the adequate power increment and time duration of WTs using SIC are the key questions that have not yet been fully addressed. This paper proposes an intelligent learning-based control system for wind turbines participation in frequency control, as well as for mitigating negative effects of the SIC. Firstly, an appropriate optimization model for grid frequency control is defined. Then, the model is solved using lightning flash algorithm (LFA), imperialist competitive algorithm and particle swarm optimization to control the WTs in a wind farm. The obtained dataset by LFA are applied to an artificial neural network that is trained with Levenberg-Marquardt algorithm and LFA. The proposed control system optimally adjusts the power increment and duration time of participation for each WT in the farm. Analyses on a 100 MW wind farm integrated into the IEEE 9-bus system and experimental tests proved the efficacy of the proposed approach.

6 February 2017 in IET Renewable Power Generation
Verified
Journal Article
Open access
PDF file
MYMinghui Yin
Minghui Yin
WLWeijie Li
Weijie Li
CCChi Yung. Chung
Chi Yung. Chung
LZLianjun Zhou
Lianjun Zhou
ZCZaiyu Chen
Zaiyu Chen
YZYun Zou
Yun Zou
This study focuses on the development of optimal torque (OT) control, which is a commonly used method for maximum power point tracking (MPPT). Due to the sluggish response of wind turbines with high inertia, conventional OT control was improved to increase MPPT efficiency by dynamically modifying the generator torque versus rotor speed curve. An idea that tracking a local interval of wind speed where the wind energy is primarily distributed rather than the total range of wind speed variation is applied in this study. On this basis, an effective tracking range (ETR) that corresponds to the local interval of wind speed with concentrated wind energy distribution is proposed and an improved OT control based on ETR is developed. In this method, based on a direct relationship between ETR and wind conditions, the torque curve can be quickly optimised so that higher and more stable MPPT efficiency can be achieved under varying wind conditions. Meanwhile, MPPT efficiency enhancement by reducing tracking range without increasing torque discrepancy leads to a low cost of generator torque fluctuation and drive train load. Finally, simulations based on fatigue, aerodynamics, structures, and turbulence (FAST) code and experiments conducted on a wind turbine simulator are presented to verify the proposed method.

19 April 2022 in IEEE Transactions on Sustainable Energy
Verified
Journal Article
Closed access
MKMostafa Kheshti
Mostafa Kheshti
SLShuyue Lin
Shuyue Lin
XZXIAOWEI ZHAO
XIAOWEI ZHAO
LDLei Ding
Lei Ding
MYMinghui Yin
Minghui Yin
VTVladimir Terzija
Vladimir Terzija
Accordingto recent grid codes, large-scale wind turbines (WTs) are required to provide fast frequency response (FFR). The existing stepwise inertial control methods suggest immediate incremental power injection by WTs, followed by the abrupt over-production termination to avoid over-deceleration of the rotor speed. These methods have a drawback that they impose severe secondary frequency drops (SFD), or they consider an unrealistic constant wind speed during their inertial control support. This paper proposes a novel Gaussian distribution-based inertial control (GDBIC) scheme that can improve the frequency nadir without rotor speed over-deceleration. Upon detecting a power imbalance, WT increases the output power with an incremental power and declines it following Gaussian distribution trajectory controlled by a standard deviation parameter, ensuring by this convergence of the rotor speed to a stable equilibrium. The proposed scheme is also capable of responding to a second cascade event. The performance of the GDBIC is tested on the wind-integrated IEEE 9-bus system and the IEEE 39-bus system in DIgSILENT PowerFactory. It is also compared with other methods reported in literature. Furthermore, experimental tests are used to verify the performance of the proposed scheme, using two different hardware-in-the-loop testing facilities. The blade fatigue is studied using Fatigue, Aerodynamics, Structures, and Turbulence (FAST) Code. The simulation and experimental results showed that the release of the kinetic energy in rotors using the proposed GDBIC scheme allows significant improvement of the frequency nadir, with no SFD, as well as contribute to reliable operation during abrupt wind changes.

2 May 2017 in IEEE Transactions on Power Systems
Verified
Journal Article
Closed access
Yan XuYan Xu
Yan Xu
MYMinghui Yin
Minghui Yin
Zhaoyang DongZhaoyang Dong
Zhaoyang Dong
RZRui Zhang
Rui Zhang
DHDavid J. Hill
David J. Hill
YZYuchen Zhang
Yuchen Zhang
High-level wind power integration can dramatically affect a power system's dynamic performance and introduce significant uncertainties to system's operation. This paper proposes a robust dispatch method to optimize the power system's operation state while sustaining its transient stability with highly variable and stochastic wind power generation. The problem is first modeled as an augmented optimal power flow model with uncertain variables and differential-algebraic equations. Then, the stability constraints are converted to approximately-equivalent algebraic equations based on one-machine-infinite-bus equivalence technique and trajectory sensitivity analysis. Next, the uncertain wind power generation is represented by a small number of strategically selected testing scenarios. Finally, a decomposition-based computation strategy is developed to divide the original model into a master problem and a series of slave problems which are solved iteratively. Using industry-grade system dynamic models and simulation software, the proposed method is tested on the New England 39-bus system and Nordic32 system, showing high performance on economic optimality, stability robustness, and computational efficiency.

9 February 2017 in IET Renewable Power Generation
Verified
Journal Article
Open access
PDF file
MYMinghui Yin
Minghui Yin
WLWeijie Li
Weijie Li
CCChi Yung Chung
Chi Yung Chung
ZCZaiyu Chen
Zaiyu Chen
YZYun Zou
Yun Zou
Wind turbine simulators (WTSs), devised for pre‐validation of control strategies for wind energy conversion system, commonly employ the inertia compensation scheme for reproducing mechanical behaviours similar to real wind turbines (WTs). However, it is found in this study that when a WT with large inertia is simulated, the time delay in command communication from control unit to motor driver, usually neglected in the existing inertia compensation scheme, results in the oscillating acceleration response and consequently leads to instability of the WTS system. As a result, the existing WTS is unable to stably simulate large‐inertia WTs, which significantly limits its applicability. Hence, in this study, a linear discrete model of the inertia compensation part that considers time delay of acceleration observation and communication is developed. On the basis of this model, an improved inertia compensation scheme in which a high‐order filter is introduced to eliminate the deviation of acceleration response caused by the two types of time delay is proposed. Finally, the improved inertia compensation scheme and its applicability to simulating a 600 kW WT developed by National Renewable Energy Laboratory are experimentally verified.