Jingjing He

Dr. Jingjing He


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
JHJingjing He
Jingjing He
Hao ChenHao Chen
Hao Chen
XSXin Su
Xin Su
BXBin Xie
Bin Xie
QLQuanwei Li
Quanwei Li
Polyoxymethylene dimethyl ethers (PODE) are a newly appeared promising oxygenated alternative that can greatly reduce soot emissions of diesel engines. The combustion characteristics of the PODE and diesel blends (the blending ratios of PODE are 0%, 20%, 50% and 100% by volume, respectively) are investigated based on an optical engine under the injection timings of 6, 9, 12 and 15-degree crank angles before top dead center and injection pressures of 100 MPa, 120 MPa and 140 MPa in this study. The results show that both the ignition delay and combustion duration of the fuels decrease with the increasing of PODE ratio in the blends. However, in the case of the fuel supply of the optical engine being fixed, the heat release rate, cylinder pressure and temperature of the blend fuels decrease with the PODE addition due to the low lower heating value of PODE. The addition of PODE in diesel can significantly reduce the integrated natural flame luminosity and the soot formation under all injection conditions. When the proportion of the PODE addition is 50% and 100%, the chemical properties of the blends play a leading role in soot formation, while the change of the injection conditions have an inconspicuous effect on it. When the proportion of the PODE addition is 20%, the blend shows excellent characteristics in a comprehensive evaluation of combustion and soot reduction.

9 August 2019 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Verified
Journal Article
Closed access
JHJingjing He
Jingjing He
HCHao Chen
Hao Chen
LGLimin Geng
Limin Geng
BXBin Xie
Bin Xie
XZXuan Zhao
Xuan Zhao
PZPeng Zhang
Peng Zhang
Blending gasoline in diesel may decrease the viscosity and decrease the distillation temperature and thus improve the spray and air-fuel mixture quality. Diesel (D100), 80% diesel and 20% gasoline by vol. (D80G20), and 60% diesel and 40% gasoline by vol. (D60G40) were experimentally investigated. The ignition delay prolongs, the combustion duration shortens and the peak combustion temperature increase with gasoline. The number concentrations (NCs) of ultrafine particles (UFPs) decrease and the NOx emissions increase with gasoline. The NCs of UFPs increase and the NOx emissions decrease with exhaust gas recirculation (EGR). The NCs of UFPs and the NOX emissions of D60G40 can be simultaneously reduced with 20% EGR compared to D100 without EGR.

1 January 2022 in Energy Engineering
Verified
Journal Article
Open access
PDF file
YCYanfei Chen
Yanfei Chen
JHJingjing He
Jingjing He
Hao ChenHao Chen
Hao Chen
XSXin Su
Xin Su
BXBin Xie
Bin Xie
20% n-butanol is blended in diesel by volume (noted as D80B20) and experiment has been carried out to study the effect on the combustion and emission characteristics based on a common rail diesel engine with exhaust gas recirculation (EGR) system. The results reveal that D80B20 has longer ignition delay, shorter combustion duration and higher maximum in-cylinder temperature than pure diesel (noted as D100). Further, the number concentration and volume concentration of ultrafine particles decrease significantly while NOX emissions increase a little with the addition of n-butanol. When the exhaust gas is induced into cylinder, NOX emissions significantly decrease and ultrafine particles emissions increase. The number geometric mean diameters and volume geometric mean diameters of ultrafine particles increase with EGR ratio. Compared to D100 without EGR, D80B20 with 20% EGR ratio can reduce both NOX and ultrafine particles emissions at 0.14 MPa BMEP and 0.56 MPa BMEP.