Owing to the influence of the injection molding process, warpage and volume shrinkage are two common quality defects for products manufactured by glass fiber-reinforced plastic (GFRP) injection molding. To minimize these two defects, an extreme learning machine optimized with a genetic algorithm (GA-ELM), multi-objective firefly algorithm (MOFA), and a multi-objective decision-making method (GRA-TOPSIS) were implemented in this study. All of the experiments, based on Latin hypercubic sampling (LHS), were conducted using Moldflow software to obtain the results for warpage and volume shrinkage. The prediction accuracy of the defect-prediction models based on the extreme learning machine (ELM) and GA-ELM algorithms were compared. The results show that the GA-ELM models can better predict the defect values. Finally, MOFA was used to find the Pareto optimal front, and the GRA-TOPSIS method was used to find the optimum solution from the Pareto optimal front. According to the results of the simulation verification, the warpage and volume shrinkage were effectively reduced by 12.25% and 6.11%, respectively, compared with before optimization, which indicates the effectiveness and reliability of the optimization method.
18 October 2022 in International Polymer Processing
Injection molding of thin-walled plastic parts with minimum deformation in warpage and volume shrinkage is crucial for part quality. Simulation combined Latin hypercube sampling approach was used to research the effects of different process parameters on deformation. Then, random forest regression (RFR) is used to construct the mathematical relationship between process parameters and defects, such as warpage and volume shrinkage. The gaussian process is used as probabilistic surrogate model, while the probability of improvement is used as acquisition function to construct a Bayesian optimization for RFR’s hyperparameters, and the performance of random search is compared. In addition, the gradient boosting regression (GBR) and support vector regression (SVR) were also adopted to establish the prediction models, respectively. Comparing all the above prediction models, it can be found that the Bayesian optimized random forest regression (BO-RFR) has the highest accuracy. The Non-dominated Sorting Genetic Algorithm-II (NSGA-II) is interfaced with the predictive models to find the optimum design parameters for the purpose of effectively predicting and controlling warpage and volume shrinkage. The results show that warpage is reduced by 66.03% while volume shrinkage is 46.20% after optimizing. The final finite element simulation and physical tests indicate that this proposed method can effectively achieve the multi-objective optimization of injection molding.
ECG recorders are precision medical devices, but their thin-walled shells are susceptible to warpage and shrinkage during injection molding production due to the injection molding process, which greatly shortens their service life. To address this problem, a multiobjective optimization method for injection molding process parameters based on a combination of a BP neural network model optimized by an ant colony algorithm (ACO-BP) and an improved non-dominated sorting genetic algorithm (NSGA-II) is proposed. The study takes the warpage deformation amount and volume shrinkage rate of the plastic part as the optimization objectives, and the melt temperature, mold temperature, injection pressure, holding pressure, holding time, and cooling time as the design variables. However, for BP neural networks, it is crucial to choose an appropriate number of hidden layer neurons, so the particle swarm algorithm combined with the grey wolf algorithm (GWO-PSO) is used to solve for the optimal number of hidden layer neurons. Firstly, the number of hidden layer neurons of the BP network model was solved based on the samples obtained from the Box–Behnken experimental design and the GWO-PSO algorithm, and the ACO-BP algorithm was used to build the prediction models for warpage and volume shrinkage, respectively, and then combined with NSGA-II for global optimisation. The pareto optimal solution set was subjected to CRITIC analysis and the optimal process parameters were finally obtained, with a minimum warpage of 0.3293 mm and minimum volume shrinkage of 4.993%, a reduction of 8.93 and 6.95% respectively compared to the pre-optimisation period. At the same time, injection molding tests were carried out on the optimum process parameters, and it was found that the molding quality of the plastic parts was better and met the actual production requirements through measurement. The research in this paper provides a theoretical basis for further improving the quality defects of the thin-walled injection molded parts.