Gravitational forcing of oversteepened rock mass leads to progressive failure, including rupture, creeping, sliding and eventual avalanching of the unstable mass. As the point of rupture initiation typically follows pre-existing structural discontinuities within the rock mass, understanding the structural setting of slopes is necessary for an accurate characterisation of the hazards and estimation of the risk to life and infrastructure. Northern Norway is an alpine region with a high frequency of large rock slope deformations. Inherited structures in the metamorphic bedrock create a recurring pattern of anisotropy, that, given certain valley orientations, causes mass instability. We review the geomorphology, structural mechanics and kinematics of nine deforming rock slopes in Troms County, with the aim of linking styles of deformation. The limits of the unstable rock mass follow either foliation planes, joint planes or inherited faults, depending on the valley aspect, slope angle, foliation dip and proximity to fault structures. We present an updated geotechnical model of the different failure mechanisms, based on the interpretations at each site of the review.
Human modification of natural landscapes has influenced surface processes in many settings on Earth. Quantitative data comparing the distribution and behavior of geologic phenomena before and after human arrival are sparse but urgently required to evaluate possible anthropogenic influences on geologic hazards. We conduct field and imagery-based mapping, statistical analysis, and numerical modeling of rockfall boulders triggered by the fatal 2011 Christchurch earthquakes (n = 285) and newly identified prehistoric (Holocene and Pleistocene) boulders (n = 1049). Prehistoric and modern boulders are lithologically equivalent, derived from the same source cliff, and yield consistent power-law frequency-volume distributions. However, a significant population of modern boulders (n = 26) traveled farther downslope (>150 m) than their most-traveled prehistoric counterparts, causing extensive damage to residential dwellings at the foot of the hillslope. Replication of prehistoric boulder distributions using three-dimensional rigid-body numerical models that incorporate lidar-derived digital topography and realistic boulder trajectories and volumes requires the application of a drag coefficient, attributed to moderate to dense slope vegetation, to account for their spatial distribution. Incorporating a spatially variable native forest into the models successfully predicts prehistoric rockfall distributions. Radiocarbon dating provides evidence for 17th to early 20th century deforestation at the study site during Polynesian and European colonization and after emplacement of prehistoric rockfall. Anthropocene deforestation enabled modern rockfalls to exceed the limits of their prehistoric predecessors, highlighting a shift in the geologic expression of rockfalls due to anthropogenic activity. Reforestation of hillslopes by mature native vegetation could help reduce future rockfall hazard.
27 May 2019 in Natural Hazards and Earth System Sciences
Rockfall modelling is an important tool for hazard analysis in steep terrain. Calibrating terrain parameters ensures that the model results more accurately represent the site-specific hazard. Parameterizing rockfall models is challenging because rockfall runout is highly sensitive to initial conditions, rock shape, size and material properties, terrain morphology, and terrain material properties. This contribution examines the mechanics of terrain impact scarring due to rockfall on the Port Hills of Christchurch, New Zealand. We use field-scale testing and laboratory direct shear testing to quantify how the changing moisture content of the loessial soils can influence its strength from soft to hard, and vice versa. We calibrate the three-dimensional rockfall model RAMMS by back-analysing several well-documented rockfall events that occurred at a site with dry loessial soil conditions. We then test the calibrated “dry” model at a site where the loessial soil conditions were assessed to be wet. The calibrated dry model over-predicts the runout distance when wet loessial soil conditions are assumed. We hypothesize that this is because both the shear strength and stiffness of wet loess are reduced relative to the dry loess, resulting in a higher damping effect on boulder dynamics. For both realistic and conservative rockfall modelling, the maximum credible hazard is usually assumed; for rockfall on loess slopes, the maximum credible hazard occurs during dry soil conditions.
Rockslides with basal shear zones often creep with periodic accelerations controlled by shear-zone material properties. These properties influence hydraulic conductivity, residual friction angle, and rate dependence. We present mineralogical, grain-size distribution, and ring-shear data from a shear-band soil at the Gámanjunni-3 rockslide Northern Norway. X-ray diffraction indicates phyllosilicate-rich assemblages (>70 wt.% clay minerals) dominated by illite/mica and illite–vermiculite, with minor illite–smectite. Grain-size distributions at outcrop scale are sandy–gravelly. Ring-shear tests on a representative sample give apparent residual friction angle of ≈19–24° and predominantly rate-strengthening behavior from 0.01 to 2 mm/min, with a tentative drop in apparent friction at 10 mm/min. These results are consistent with a model in which deformation localizes along inherited foliation-parallel ductile shear zones, with comminution-driven clay enrichment reducing frictional strength and leading to steady deformation without rapid acceleration periods (the precursor to failure). Gámanjunni-3 is sensitive to external forcing, with implications for seasonal acceleration and climate-driven changes in slope stability in an area where increased rainfall intensity and duration is expected.