Di Tan

Di Tan

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 December 2018 in IEEE Access
Verified
Journal Article
Open access
DTDi Tan
Di Tan
HXHaojie Xue
Haojie Xue
KYKun Yang
Kun Yang
ALAn Li
An Li
HWHaitao Wang
Haitao Wang
The driving conditions of vehicles, such as rapid acceleration, lasting downhill and so on, which demand for drive power, are rapidly increasing. For an electric vehicle driven by in-wheel motor (IWM), the IWM needs to provide greater power to maintain the normal operation of the vehicle. At present, the pursuit of high power density for IWM reduces the volume of motor under the same power. But the loss density is increased correspondingly, which will lead to overheating of IWM. In this paper, a 15-kW IWM drive system is taken as the research object. Based on the establishment of the temperature analysis model, instantaneous thermal characteristics of the IWM drive system are analyzed under the long climbing condition with low-speed and rapid acceleration driving cycles. The results show that the temperature of the stator winding and stator core is relatively high under the two driving cycles. The temperature of the stator winding is always in the highest level, and the maximum all appear on the end winding. The highest temperature of the end winding can reach 229.49 °C under the rapid acceleration driving cycles, which significantly exceeds the limitation for the insulation (155 °C) and will seriously affect the normal operation of the IWM and the vehicle. Therefore, in the follow-up design of cooling system, spray cooling with good local cooling effect can be adopted to focus on the cooling for the end winding. This paper can provide theory for the design of the feasibility thermal cooling solution.

29 September 2014 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
DTDi Tan
Di Tan
CLChao Lu
Chao Lu
CRChuanbo Ren
Chuanbo Ren
To overcome the increase in the unsprung mass and deformation of the magnet gap for in-wheel-motor-propelling systems, a novel topology scheme had been presented in previous work. In this study, an optimal matching design between the suspension and the rubber bushing is employed for the novel system to reduce the effect of the road surface roughness on the magnet gap as much as possible, on the basis of good ride quality and comfort. First, the half-vehicle model of the scheme is set up. Second, the objective function is developed using the weighting coefficient method to obtain a balanced consideration of the magnet gap deformation, the body’s pitch angle acceleration and the vertical vibration acceleration which takes the road condition, the vehicle speed and the load condition into account. The suspension’s dynamic travel, the dynamic load of the tyres, the damping parameters of the suspension, the bushing stiffness, the bushing damping and the bushing deformation are selected as the constraint conditions. Third, the design optimization for matching is carried out with the following excitation sources: the road surface roughness and the unbalanced magnetic force. Finally, a comparative analysis of the three optimization indices is performed before and after the optimization. The results show that, after optimal matching, all vibration response variables demonstrate measurable improvements. The magnet gap deformation achieves the greatest improvement, followed by the vertical vibration acceleration and the body’s pitch angle acceleration. The magnet gap deformation is improved by 42.4%, 45.4% and 44.99% under the no-load condition, the half-load condition and the full-load condition respectively, and the deformation of the rubber bushings satisfies the required design. The performance improvement is significant. The optimal matching method can be used to solve research problems involving the magnet gap deformation and the ride comfort of in-wheel-motor-driven vehicles, while at the same time offering a method for design optimization.

23 August 2013 in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Verified
Journal Article
Closed access
YLYutao Luo
Yutao Luo
DTDi Tan
Di Tan
An increase in the unsprung mass is a critical issue for an electric vehicle driven by an in-wheel motor. The mass increase will cause the ride quality and comfort to deteriorate. To decrease the unsprung mass, a hybrid lightweight design method including size optimization and topology optimization is employed for the in-wheel motor. The two optimizations are carried out in sequence. First, the finite element method, the response surface method and the particle swarm optimization algorithm are employed in the size optimization design of the in-wheel motor. After this step, the mass of the in-wheel motor is reduced to 2.7448 kg, while its rated torque and losses are almost unchanged. Second, according to the above optimization results, topology optimization using the method of variable density is employed for the supporting frame of the stator of the in-wheel motor, which is the non-magnetic area. The material which is grade 45 steel is analysed. The optimization results show that, after optimization and treatment, the mass of the supporting frame is reduced to 1.069 kg, i.e. 63.11% lighter than before. Then, structural strength verification is carried out. Considering the above two optimization steps synthetically, the total mass of the in-wheel motor with a grade 45 steel supporting frame is reduced by 3.5547 kg, which means that it is 13.623% lighter than the original structure. Calculation of the transient torque and losses show that, after optimization, the total loss is reduced by 1.87%, and the torque by only 1.8%. Therefore, the hybrid optimization method studied in this paper works well for the lightweight design of an in-wheel motor.

27 February 2020 in Mechanics Based Design of Structures and Machines
Verified
Journal Article
Closed access
DTDi Tan
Di Tan
YWYanshou Wu
Yanshou Wu
JFJie Feng
Jie Feng
KYKun Yang
Kun Yang
XJXijie Jia
Xijie Jia
CMChao Ma
Chao Ma
The lightweight problem of in-wheel motor is one of the key problems to be solved in the development of in-wheel motor driving electric vehicles. However, in-wheel motor involves the cross-coupling effect of multi-physical fields, such as the structure field, electromagnetic field and thermal field. The lightweight design for the in-wheel motor means the change in the structure, which will lead to the change in other physical field characteristics. Aiming at this problem, a lightweight design method is proposed in this paper. A 15Kw embedded permanent magnet synchronous in-wheel motor is taken as the research object, the minimum volume is set as the optimization objective, and the topology optimization design method is adopted to reduce the weight of the motor. And in the optimization design process, the bilateral coupling constraint of the electromagnetic field and thermal field is taken into account simultaneously. This study aims to find the optimal topology distribution considering the cross-coupling effect of structure-electromagnetic-thermal fields, and obtain the optimal structure of the in-wheel motor that meets the design requirements. Furthermore, the validity of the lightweight design method is verified by comparing and analyzing the characteristics of each physical field of the in-wheel motor before and after optimization. Communicated by John McPhee.

17 April 2023 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
DTDi Tan
Di Tan
MYMeng Yuan
Meng Yuan
ZGZhiqi Gao
Zhiqi Gao
FQFang Qiu
Fang Qiu
The requirement of high-power density and the problems of high temperature and uneven air gap caused by environmental constraints make the alternating effect of internal temperature and related constraints between components during the operation of the motor for in-wheel electric vehicle. These effects and constraints will lead to thermal stress and concomitant deformation, and seriously affect the safe operation of in-wheel motors (IWMs) and vehicles. Aiming at the above problems, this paper takes a 15kW IWM as the research object. Based on the analysis of the mutual coupling relationship between the multi-physics field, such as the electromagnetic field, the temperature field, the flow field and the structural field, a thermal stress analysis model of the IWM is established and verified firstly. Then, quantitative calculation of the thermal stress/strain state of the IWM with or without eccentricity is carried out under different working conditions. The analytical results show that the thermal load generated internally leads to the generation of uneven thermal stress and accompanying thermal deformation, and the maximum thermal stress (MTS) and maximum thermal deformation (MTD) do not appear on the same component. Although eccentricity does not affect the position of the MTS and the MTD, it has an important effect on the maximum value of the stress and deformation, especially the eccentricity exceeds 30%. The results also demonstrate that the permanent magnet (PM) is most significantly affected by the eccentricity.

29 November 2017 in Journal of Vibration and Control
Verified
Journal Article
Closed access
DTDi Tan
Di Tan
FSFan Song
Fan Song
QWQiang Wang
Qiang Wang
In order to solve the problems of the increasing unsprung mass and the influence of the road excitation on the in-wheel motor (IWM), this paper puts forward two kinds of improved topology schemes. The bond graph (BG) and mathematical models of original and improved topological schemes are developed by using the BG theory. Based on the mathematical model, the final topology scheme is determined by the analysis of vibration energy transfer characteristics for the three schemes. It is further proved that the vibration energy analysis method is effective and complete in revealing the change of the system force and motion through the comparison analysis of the three kinds of topology scheme related to vehicle force and ride comfort index of motion variable. Furthermore, the optimal design is carried out for the determined topology scheme, which is aimed at minimum vibration energy delivered to the vehicle body. The comparison results before and after optimization show that: after optimization, the vibration energy delivered to the vehicle body has significantly decreased in the whole frequency range, and the vibration energy delivered to other components also decreased, which proved the correctness of the optimization method; and the comparison results of ride comfort index before and after optimization validate the effectiveness of the parameter optimization design based on the energy method. Finally, a structure design is provided based on the determined topology scheme. This paper provides an idea and method for the vibration suppression of the IWN driving electric vehicle (EV), while it can also provide some theoretical guidance for the design and optimization of the IWN driving EV.