Indoor user localization and tracking are instrumental to a broad range of services and applications in the Internet of Things (IoT) and particularly in Body Sensor Networks (BSN) and Ambient Assisted Living (AAL) scenarios. Due to the widespread availability of IEEE 802.11, many localization platforms have been proposed, based on the Wi-Fi Received Signal Strength (RSS) indicator, using algorithms such as K-Nearest Neighbour (KNN), Maximum A Posteriori (MAP) and Minimum Mean Square Error (MMSE). In this paper, we introduce a hybrid method that combines the simplicity (and low cost) of Bluetooth Low Energy (BLE) and the popular 802.11 infrastructure, to improve the accuracy of indoor localization platforms. Building on KNN, we propose a new positioning algorithm (dubbed i-KNN) which is able to filter the initial fingerprint dataset (i.e., the radiomap), after considering the proximity of RSS fingerprints with respect to the BLE devices. In this way, i-KNN provides an optimised small subset of possible user locations, based on which it finally estimates the user position. The proposed methodology achieves fast positioning estimation due to the utilization of a fragment of the initial fingerprint dataset, while at the same time improves positioning accuracy by minimizing any calculation errors.

In the near future, the fifth-generation wireless technology is expected to be rolled out, offering low latency, high bandwidth and multiple antennas deployed in a single access point. This ecosystem will help further enhance various location-based scenarios such as assets tracking in smart factories, precise smart management of hydroponic indoor vertical farms and indoor way-finding in smart hospitals. Such a system will also integrate existing technologies like the Internet of Things (IoT), WiFi and other network infrastructures. In this respect, 5G precise indoor localization using heterogeneous IoT technologies (Zigbee, Raspberry Pi, Arduino, BLE, etc.) is a challenging research area. In this work, an experimental 5G testbed has been designed integrating C-RAN and IoT networks. This testbed is used to improve both vertical and horizontal localization (3D Localization) in a 5G IoT environment. To achieve this, we propose the DEep Learning-based co-operaTive Architecture (DELTA) machine learning model implemented on a 3D multi-layered fingerprint radiomap. The DELTA begins by estimating the 2D location. Then, the output is recursively used to predict the 3D location of a mobile station. This approach is going to benefit use cases such as 3D indoor navigation in multi-floor smart factories or in large complex buildings. Finally, we have observed that the proposed model has outperformed traditional algorithms such as Support Vector Machine (SVM) and K-Nearest Neighbor (KNN).

This research work investigates how RSS information fusion from a single, multi-antenna access point (AP) can be used to perform device localization in indoor RSS based localization systems. The proposed approach demonstrates that different RSS values can be obtained by carefully modifying each AP antenna orientation and polarization, allowing the generation of unique, low correlation fingerprints, for the area of interest. Each AP antenna can be used to generate a set of fingerprint radiomaps for different antenna orientations and/or polarization. The RSS fingerprints generated from all antennas of the single AP can be then combined to create a multi-layer fingerprint radiomap. In order to select the optimum fingerprint layers in the multilayer radiomap the proposed methodology evaluates the obtained localization accuracy, for each fingerprint radio map combination, for various well-known deterministic and probabilistic algorithms (Weighted k-Nearest-Neighbor—WKNN and Minimum Mean Square Error—MMSE). The optimum candidate multi-layer radiomap is then examined by calculating the correlation level of each fingerprint pair by using the “Tolerance Based—Normal Probability Distribution (TBNPD)” algorithm. Both steps take place during the offline phase, and it is demonstrated that this approach results in selecting the optimum multi-layer fingerprint radiomap combination. The proposed approach can be used to provide localisation services in areas served only by a single AP.

Planning and deploying a functional large scale Wireless Sensor Network (WSN) or a Network of Internet of Things (IoTs) is a challenging task, especially in complex urban environments. A main network design bottleneck is the existence and/or correct usage of appropriate cross layer simulators that can generate realistic results for the scenario of interest. Existing network simulators tend to overlook the complexity of the physical radio propagation layer and consequently do not realistically simulate the main radio propagation conditions that take place in urban or suburban environments, thus passing inaccurate results between Open Systems Interconnection (OSI) layers. This work demonstrates through simulations and measurements that, by correctly passing physical information to higher layers, the overall simulation process produces more accurate results at the network layer. It is demonstrated that the resulting simulation methodology can be utilized to accomplish realistic wireless planning and performance analysis of the deployed nodes, with results that are very close to those of real test-beds, or actual WSN deployments.

The densification of modern wireless networks into a dense ecosystem of small cells imposes challenges for the reliable service and high quality of experience of its users as it can result into severe intercell interference, especially for users scattered on the cell edges. Joint Transmission Coordinated Multipont (JT-CoMP) is a technique that can be deployed to form cooperating clusters of transmission points, enabling them to jointly transmit data to significantly mitigate this type of interference for these users. However, JT-CoMP stresses the backhaul links and radio resources are limited, meaning that, with incautious clustering, the data rates for cell edge users may not improve, while the data rates for the non-cell edge users may severely decrease. To tackle these drawbacks, a dynamic coalition formation algorithm is proposed to form the appropriate transmission point clusters to implement JT-CoMP. Furthermore, to ensure reliable service for all the network’s users, the case where JT-CoMP is enhanced with the capability to serve users based on their selected application is examined. The proposed scheme’s adaptability and capability to increase cell edge user throughput is then tested and compared to the non JT-CoMP case, a JT-CoMP scheme with static clustering and a JT-CoMP scheme with greedy clustering for a user mobility scenario. To obtain more reliable and accurate results of the JT-CoMP deployment, physical layer parameters retrieved from a fully deterministic physical layer radio planning tool (TruNET wireless) are imported for our simulations.