We present a theoretical approach to estimate the fluid leakage in flat seals. The approach is based on the analogy between the seal-substrate interface and a porous medium. We assume that the interface is constituted of a random distribution of noncontact patches (the pores) and small but numerous contact spots (islands). Leakage may occur only through the pores, of which the lateral size and height are distributed according to a probability density function that we calculate on the basis of a recent theory of contact mechanics. Our theoretical approach is based on a percolation scheme that has never been proposed before and we believe it could be useful to stimulate further theoretical or experimental investigations. Within this percolation scheme we apply critical path analysis to calculate the hydraulic conductivity of the medium and compare our predictions with other calculations very recently presented to the scientific community.

Battery electric vehicles (BEVs) represent a possible sustainable solution for personal urban transportation. Presently, the most limiting characteristic of BEVs is their short range, mainly because of battery technology limitations. A proper design and control of the drivetrain, aimed at reducing the power losses and thus increasing BEV range, can contribute to make the electrification of urban transportation a convenient choice. This paper presents a simulation-based comparison of the energy efficiency performance of six drivetrain architectures for BEVs. Although many different drivetrain and transmission architectures have been proposed for BEVs, no literature was found regarding BEVs equipped with infinitely variable transmissions (IVTs). The analyzed drivetrain configurations are: single- (1G) and two-speed (2G) gear drives, half toroidal (HT) and full toroidal (FT) continuously variable transmissions (CVTs), and infinitely variable transmissions (IVTs) with two different types of internal power flow (IVT-I and IVT-II). An off-line procedure for determining the most efficient control action for each drivetrain configuration is proposed, which allows selecting the optimal speed ratio for each operating condition. The energy consumption of the BEVs is simulated along the UDC (Urban Driving Cycle) and Japanese 10-15 driving cycle, with a backward facing approach. In order to achieve the lowest energy consumption, a trade-off between high transmission efficiency and flexibility in terms of allowed speed ratios is required.