In this paper, a shape optimization method of a truncated conical point absorber wave energy converter is proposed. This method converts the wave energy absorption efficiency into the matching problem between the wave spectrum of the South China Sea and the buoy’s absorption power spectrum. An objective function which combines these two spectra is established to reflect the energy absorbing efficiency. By applying Taguchi design, the frequency domain hydrodynamic analysis and the response surface method (RSM), the radius, cone angle and draft of the buoy are optimized. Since the significant influence of power take-off system (PTO) on energy absorption, the optimal PTO damping under random wave conditions is also studied. The optimal shape is acquired by maximizing the energy absorbing efficiency. Four types of performance and the influence of each geometrical parameter are also obtained. In addition, the cause of the trend of performance as well as the effects of adjusting the input parameters are analyzed. This study can provide guidance for the shape optimization of multi-parameter buoys.
7 March 2020 in Journal of Electrical and Computer Engineering
Microgrid is an effective way to utilize renewable energy resources, especially for satisfying the electricity requirements in remote islands. The operation optimization of an island microgrid is critical to ensure the effective performance of the whole microgrid system, and it is usually a multiconstrained and multiobjective optimization problem. The main contribution of this study is an operation optimization method for the stand-alone microgrid system in a remote island, which includes wind, PV, battery, and diesel generator. In this paper, a novel operation optimization model for stand-alone microgrid is proposed, in which the battery system is considered separately; the multiobjective day-ahead optimization model considering economic cost, battery depreciation cost, and environmental protection cost is established. In the optimization, the output power of diesel generator and energy storage system are chosen as the decision variables. For this purpose, an efficient search algorithm combining the particle swarm optimization (PSO) algorithm and the simulated annealing (SA) algorithm is developed. The hybrid algorithm is applied to search for the Pareto solution set of the optimization problem. The search results are compared with those from traditional PSO algorithm. Also, a grey target decision-making theory based on the entropy weight method is proposed to identify the best trade-off scheduling scheme among all the solutions, and the results are compared with those from two other commonly used subjective and objective methods. The results show that the proposed optimization method can be applied to the day-ahead operation optimization of the microgrid system and help the user obtain the best compromise operation scheme for stand-alone microgrid.
In this paper, the study and optimization design of stator coreless axial flux permanent magnet synchronous generators is presented for direct driven variable speed renewable energy generation system applications while considering the requirement of reliability and dynamic performance with unstable input conditions. The dynamic analytical model is developed based on the investigation of the axial flux permanent magnet synchronous generator (AFPMSG) structure and basic electromagnetic equations to find out the relationship between generator parameters and dynamic performance. Simulation via the MATLAB/Simulink platform is carried out to obtain the sensitivity of dynamic performance to generator parameters. An integrated optimization model that takes the key parameters as variables is proposed, aiming to improve the mechanical dynamic performance of AFPMSG. For accurate design, the design procedure is modified by combining the nonlinear iterative genetic algorithm (GA) to perform the calculation. A 3_kW AFPMSG is optimally designed to minimize the output voltage overshooting—the index of dynamic performance for direct driven variable speed generation application. Finally, a three-dimensional (3D) finite element model of the generator is established by Maxwell ANSOFT, and the simulation results confirm the validity of the dynamic performance analysis and optimal design procedure.
11 October 2021 in Mathematical Problems in Engineering
In order to analyse the impact of renewable generation and load uncertainties on the economic operation optimization of the island microgrid, a multiobjective economic optimal dispatch model under uncertainty based on interval optimization is proposed in this paper. The mathematical model of distributed generation and the prediction model of wind speed and wave generation are established. The uncertainties of renewable generation and load are described by the interval mathematical method. On this basis, the interval multiobjective optimal dispatch model is presented. For the “battery disgusting” users on the island, the battery cost is regarded as a separate optimization objective, and a multiobjective optimization objective function to minimize the economic cost, battery cost, and pollution emission of the island microgrid is discussed. An island microgrid, composed of wind turbine, photovoltaic, wave energy generation, diesel generator, and energy storage system, is chosen as a case study. The NSGA-II algorithm is applied to solve the multiobjective optimal problem. The results for deterministic forecast data and load are analysed, and the optimal operation scheme is obtained by the improved multiobjective grey target decision-making method. The influence of renewable generation fluctuations ±10%, ±20%, and ±30% and the load fluctuations ±10% and ±20% on island microgrid operation optimization is discussed in detail, respectively. The relevant research results can provide a reference for formulating the operating scheme of the island microgrid.
The main objective of the current paper is to determine fatigue critical details of wave-energy converters (WECs) and to evaluate their reliability. For this purpose, a new model of a water-hydraulic drive WEC is designed based on the IPS (company Interproject Service) buoy working principle, and the hydrodynamic frequency domain analysis method is carried out accordingly. A reliability assessment method, which combines the stress-number (SN) curves approach and linear damage cumulative theory, has been developed specifically for the proposed WEC. In order to obtain the stochastic wave load spectrum, 22 years of wave data of the intended deployment site (South China Sea), covering the span of 1988–2009, were analyzed, discussed and processed. A finite element analysis model is also established to calculate the maximum Von Mises stress of the fatigue critical component. The reliability indices and configuration parameters of the water hydraulic-drive WEC are obtained by applying first order reliability method, considering the uncertainty of the model parameters and the fatigue limit state. Optimization of configuration parameters is also developed based on the reliability method for the sake of approaching the expected service life. The results show that the fatigue life of the water turbine can reach the design service life of 20 years as the configuration parameters meet the specific condition. The cumulative reliability index and annual reliability index are recommended as 2.1 and 3.5, respectively.