Moritz Schappler

Mr. Moritz Schappler

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2017
Verified
Conference Paper
Closed access
JVJonathan Vorndamme
Jonathan Vorndamme
MSMoritz Schappler
Moritz Schappler
SHSami Haddadin
Sami Haddadin
High-performance collision handling, which is divided into the five phases detection, isolation, estimation, classification and reaction, is a fundamental robot capability for safe and sensitive operation/interaction in unknown environments. For complex humanoid robots collision handling is obviously significantly more complex than for classical static manipulators. In particular, the robot stability during the collision reaction phase has to be carefully designed and relies on high fidelity contact information that is generated during the first three phases. In this paper, a unified realtime algorithm is presented for determining unknown contact forces and contact locations for humanoid robots based on proprioceptive sensing only, i.e. joint position, velocity and torque, as well as force/torque sensing along the structure. The proposed scheme is based on nonlinear model-based momentum observers that are able to recover the unknown contact forces and the respective locations. The dynamic loads acting on internal force/torque sensors are also corrected based on a novel nonlinear compensator. The theoretical capabilities of the presented methods are evaluated in simulation with the Atlas robot. In summary, we propose a full solution to the problem of collision detection, collision isolation and collision identification for the general class of humanoid robots.

11 November 2024 in IEEE Robotics and Automation Letters
Verified
Journal Article
Closed access
HSHendrik Schäfke
Hendrik Schäfke
THTim-Lukas Habich
Tim-Lukas Habich
CMChristian Muhmann
Christian Muhmann
SESimon F. G. Ehlers
Simon F. G. Ehlers
TSThomas Seel
Thomas Seel
MSMoritz Schappler
Moritz Schappler
Soft robots pose difficulties in terms of control, requiring novel strategies to effectively manipulate their compliant structures. Model-based approaches face challenges due to the high dimensionality and nonlinearities such as hysteresis effects. In contrast, learning-based approaches provide nonlinear models of different soft robots based only on measured data. In this paper, recurrent neural networks (RNNs) predict the behavior of an articulated soft robot (ASR) with five degrees of freedom (DoF). RNNs based on gated recurrent units (GRUs) are compared to the more commonly used long short-term memory (LSTM) networks and show better accuracy. The recurrence enables the capture of hysteresis effects that are inherent in soft robots due to viscoelasticity or friction but cannot be captured by simple feedforward networks. The data-driven model is used within a nonlinear model predictive control (NMPC), whereby the correct handling of the RNN's hidden states is focused. A training approach is presented that allows measured values to be utilized in each control cycle. This enables accurate predictions of short horizons based on sensor data, which is crucial for closed-loop NMPC. The proposed learning-based NMPC enables trajectory tracking with an average error of $1.2^{\circ }$ in experiments with the pneumatic five-DoF ASR.

1 May 2018
Verified
Conference Paper
Open access
JKJohannes Kuhn
Johannes Kuhn
THTingli Hu
Tingli Hu
MSMoritz Schappler
Moritz Schappler
SHSami Haddadin
Sami Haddadin
This paper introduces a more complete and complex dynamics simulation tool for an exoskeletal human upper limb assistant system. This heterogeneous simulation model couples the articulated dynamics of a 6 degree-of-freedom (DoF) wearable exoskeleton with an upper-limb human neu-romechanics model of 12 skeletal and 42 muscular DoFs with corresponding controls. Furthermore, the process forces of toolmediated manipulation tasks can be fed into the overall system. This simulation tool can be used for various purposes such as 1) design and evaluation of human-centered exoskeleton controllers 2) evaluating human motor control hypotheses during exoskeleton use and 3) investigating various properties and the performance on exoskeleton systems and manipulation tasks. This framework is used exemplary in designing and implementing a human kinematic latent-space controller for a power drilling manipulation task under exoskeletal assistance.

6 August 2019 in Robotics
Verified
Journal Article
Open access
PDF file
MSMoritz Schappler
Moritz Schappler
STSvenja Tappe
Svenja Tappe
TOTobias Ortmaier
Tobias Ortmaier
Industrial manipulators and parallel robots are often used for tasks, such as drilling or milling, that require three translational, but only two rotational degrees of freedom (“3T2R”). While kinematic models for specific mechanisms for these tasks exist, a general kinematic model for parallel robots is still missing. This paper presents the definition of the rotational component of kinematic constraints equations for parallel robots based on two reciprocal sets of Euler angles for the end-effector orientation and the orientation residual. The method allows completely removing the redundant coordinate in 3T2R tasks and to solve the inverse kinematics for general serial and parallel robots with the gradient descent algorithm. The functional redundancy of robots with full mobility is exploited using nullspace projection.

1 December 2016
Verified
Conference Paper
Closed access
JVJonathan Vorndamme
Jonathan Vorndamme
MSMoritz Schappler
Moritz Schappler
ATAlexander Toedtheide
Alexander Toedtheide
SHSami Haddadin
Sami Haddadin
Soft robotics methods such as impedance control and reflexive collision handling have proven to be a valuable tool to robots acting in partially unknown and potentially unstructured environments. Mainly, the schemes were developed with focus on classical electromechanically driven, torque controlled robots. There, joint friction, mostly coming from high gearing, is typically decoupled from link-side control via suitable rigid or elastic joint torque feedback. Extending and applying these algorithms to stiff hydraulically actuated robots poses problems regarding the strong influence of friction on joint torque estimation from pressure sensing, i.e. link-side friction is typically significantly higher than in electromechanical soft robots. In order to improve the performance of such systems, we apply state-of-the-art fault detection and estimation methods together with observer-based disturbance compensation control to the humanoid robot Atlas. With this it is possible to achieve higher tracking accuracy despite facing significant modeling errors. Compliant end-effector behavior can also be ensured by including an additional force/torque sensor into the generalized momentum-based disturbance observer algorithm from [1].

12 November 2025 in IEEE Transactions on Robotics
Verified
Journal Article
Closed access
THTim-Lukas Habich
Tim-Lukas Habich
AMAran Mohammad
Aran Mohammad
SESimon F. G. Ehlers
Simon F. G. Ehlers
MBMartin Bensch
Martin Bensch
TSThomas Seel
Thomas Seel
MSMoritz Schappler
Moritz Schappler
Soft robots can revolutionize several applications with high demands on dexterity and safety. When operating these systems, real-time estimation and control require fast and accurate models. However, prediction with first-principles (FP) models is slow, and learned black-box models have poor generalizability. Physics-informed machine learning offers excellent advantages here, but it is currently limited to simple, often simulated systems without considering changes after training. We propose physics-informed neural networks (PINNs) for articulated soft robots (ASRs) with a focus on data efficiency. The amount of expensive real-world training data is reduced to a minimum — one dataset in one system domain. Two hours of data in different domains are used for a comparison against two gold-standard approaches: In contrast to a recurrent neural network, the PINN provides a high generalizability. The prediction speed of an accurate FP model is exceeded with the PINN by up to a factor of 467 at slightly reduced accuracy. This enables nonlinear model predictive control (MPC) of a pneumatic ASR. Accurate position tracking with the MPC running at 47 Hz is achieved in six dynamic experiments.