The International GNSS Service (IGS) Analysis Center Coordinator initiated in 2019 an experimental multi-GNSS orbit combination service by adapting the current combination software that has been used for many years for IGS GPS and GLONASS combinations. The multi-GNSS orbits are based on individual products generated by IGS and multi-GNSS Pilot Project analysis centers. However, the combinations are not yet considered to be the final products at this time. The goal of this research is to provide a quality assessment of the very first IGS experimental multi-GNSS combined orbits based on Satellite Laser Ranging (SLR) observations and the mean position errors from the orbit combinations. The errors available in the combined orbit files provide information about the consistency between orbits from different analysis centers, whereas SLR provides independent orbit validation results even for those satellites which are considered only by one analysis center, and thus, the quality of the combination is not provided in the orbit files. We found that the BeiDou-3 satellites manufactured by China Academy of Space Technology and Shanghai Engineering Center for Microsatellites are characterized by opposite SLR residual dependencies with respect to the position of the sun which means that the orbit models for BeiDou-3 need further improvement. Smallest SLR residuals are obtained for Galileo, GLONASS-K1, and GLONASS-M+ . However, the latter is characterized by a bias of + 29 mm. The mean standard deviations of SLR residuals are 23, 29, 87, 51, 40, and 72 mm for Galileo, GLONASS, BeiDou GEO, BeiDou IGSO, BeiDou MEO, and QZSS, respectively. The mean orbit combination errors in the radial direction are three times lower than those from SLR residuals in the case of MEO satellites and vary between 8 and 14 mm, whereas the orbit errors are four times lower than SLR residuals in the case of GEO and IGSO and equal to 11–21 mm.
AUSPOS is an openly available online Global Positioning System (GPS) data processing service provided by Geoscience Australia and is recommended by the Intergovernmental Committee on Surveying and Mapping (ICSM) for control surveys by Global Navigation Satellite System (GNSS) in the Australian region as a method for providing connection to the Geocentric Datum of Australia 2020 (GDA2020). A new and improved global reference frame, the International Terrestrial Reference Frame 2020 (ITRF2020), was released in April 2022 by the International Earth Rotation and Reference Systems Service (IERS), which was followed by the International GNSS Service (IGS) realisation, using modernised analysis standards and processing strategies, called IGS20. This paper outlines the adoption of ITRF2020/IGS20 for the AUSPOS processing service, which includes the introduction of a two-step transformation strategy to provide access to the national datum, GDA2020. The paper also provides relevant analysis and validation of the new AUSPOS system’s (v3.0) ability to produce consistent GDA2020 coordinates when compared to those produced by the previous AUSPOS system (v2.4 - aligned to ITRF2014) with observed differences of $$\:-0.2\pm\:6mm,\:-0.2\pm\:4mm\:and-0.3\pm\:21mm$$ in Easting, Northing and Height components, respectively. Geoscience Australia is committed to being Australia’s trusted provider of analytic products and services, by enhancing the accuracy and reliability of positioning within Australia.