In this paper, the authors will propose the active gait generation of a quadruped robot. The theory that quadruped animals unconsciously generate gaits by some system based on neural networks in the spinal cord is widely accepted. However, how biological neurons or neural networks can generate gaits is not clear. To clarify the gait generation method, one of the solutions is using the neuron model similar to the biological neuron. We developed the quadruped robot system using self-inhibited pulse-type hardware neuron models (P-HNMs), which can output the electrical activity similar to those of biological neurons. The P-HNMs consist of the cell body model and the inhibitory synaptic model. The cell body model periodically outputs pulsed voltages; the inhibitory synaptic model inhibits the pulsed voltages. The pulse period can change by varying the synaptic weight control voltage applied to the P-HNMs. We varied the synaptic weight control voltage according to the pressure on the robot’s toes. Also, we changed the angle of the robot’s joints by a constant angle each time the P-HNMs output a pulse. As a result of the walking experiment, we confirmed that the robot generates walk gait and trot gait according to the moving speed. Also, we clarified the process by which the robot actively generates gaits from the upright state. These results show that animals may not use many biological neurons to generate gaits. Furthermore, the results suggest the possibility of realizing simple and bio-inspired robot control.
1 January 2017 in Journal of Robotics, Networking and Artificial Life
In this paper, we will propose the neural networks integrated circuit (NNIC) which is the driving waveform generator of the 4.0, 2.7, 2.5 mm, width, length, height in size biomimetics microelectromechanical systems (MEMS) microrobot. The microrobot was made from silicon wafer fabricated by micro fabrication technology. The mechanical system of the robot was equipped with small size rotary type actuators, link mechanisms and six legs to realize the ant-like switching behavior. The NNIC generates the driving waveform using synchronization phenomena such as biological neural networks. The driving waveform can operate the actuators of the MEMS microrobot directly. Therefore, the NNIC bare chip realizes the robot control without using any software programs or A/D converters. The microrobot performed forward and backward locomotion, and also changes direction by inputting an external single trigger pulse. The locomotion speed of the microrobot was 26.4 mm/min when the step width was 0.88 mm. The power consumption of the system was 250 mWh when the room temperature was 298 K.
Living organisms can act autonomously because biological neural networks process the environmental information in continuous time. Therefore, living organisms have inspired many applications of autonomous control to small-sized robots. In this chapter, a small-sized robot is controlled by a hardware artificial neural network (ANN) without software programs. Previously, the authors constructed a multilegged walking robot. The link mechanism of the limbs was designed to reduce the number of actuators. The current paper describes the basic characteristics of hardware ANNs that generate the gait for multilegged robots. The pulses emitted by the hardware ANN generate oscillating patterns of electrical activity. The pulse-type hardware ANN model has the basic features of a class II neuron model, which behaves like a resonator. Thus, gait generation by the hardware ANNs mimics the synchronization phenomena in biological neural networks. Consequently, our constructed hardware ANNs can generate multilegged robot gaits without requiring software programs.