Porous polymeric membranes have emerged as the core technology in the field of separation. But some challenges remain for several methods used for membrane fabrication, suggesting the need for a critical review of the literature. We present here an overview on porous polymeric membrane preparation and characterization for two commonly used polymers: polysulfone and poly (vinylidene fluoride). Five different methods for membrane fabrication are introduced: non-solvent induced phase separation, vapor-induced phase separation, electrospinning, track etching and sintering. The key factors of each method are discussed, including the solvent and non-solvent system type and composition, the polymer solution composition and concentration, the processing parameters, and the ambient conditions. To evaluate these methods, a brief description on membrane characterization is given related to morphology and performance. One objective of this review is to present the basics for selecting an appropriate method and membrane fabrication systems with appropriate processing conditions to produce membranes with the desired morphology, performance and stability, as well as to select the best methods to determine these properties.

The development of porous polymeric membranes is an important area of application in separation technology. This article summarizes the development of porous polymers from the perspectives of materials and methods for membrane production. Polymers such as polyethylene, polydimethylsiloxane, polypropylene, polyimide, and polytetrafluoroethylene are reviewed due to their outstanding thermal stability, chemical resistance, mechanical strength, and low cost. Six different methods for membrane fabrication are critically reviewed, including thermally induced phase separation, melt-spinning and cold-stretching, phase separation micromolding, imprinting/soft molding, manual punching, and three-dimensional printing. Each method is described in details related to the strategy used to produce the porous polymeric membranes with a specific morphology and separation performances. The key factors associated with each method are presented, including solvent/non-solvent system type and composition, polymer solution composition and concentration, processing parameters, and ambient conditions. Current challenges are also described, leading to future development and innovation to improve these membranes in terms of materials, fabrication equipment, and possible modifications.

In order to study the temporal and spatial distribution characteristics of atmospheric pollutants in cities (districts and counties) in the Chengdu–Chongqing Twin-city Economic Circle (CCEC) and to provide a theoretical basis for atmospheric pollution prevention and control, this paper combined Ambient Air Quality Standards (AAQS) and WHO Global Air Quality Guidelines (GAQG) to evaluate atmospheric pollution and used spatial correlation to determine key pollution areas. The results showed that the distribution of atmospheric pollutants in CCEC presents a certain law, which was consistent with the air pollution transmission channels. Except for particulate matter with an aerodynamic diameter equal to or less than 2.5 μm (PM_2.5) and ozone (O₃), other pollutants reached Grade II of AAQS in 2020, among which particulate matter with an aerodynamic diameter equal to or less than 10 μm (PM₁₀), PM_2.5, sulfur dioxide (SO₂), nitrogen dioxide (NO₂) and carbon monoxide (CO) have improved. Compared with the air quality guidelines given in the GAQG, PM₁₀, PM_2.5, NO₂ and O₃ have certain effects on human health. The spatial aggregation of PM₁₀ and PM_2.5 decreased year by year, while the spatial aggregation of O₃ increased with the change in time, and the distribution of NO₂ pollution had no obvious aggregation. Comprehensive analysis showed that the pollution problems of particulate matter, NO₂ and O₃ in CCEC need to be further controlled.