Harri Nieminen

Dr. Harri Nieminen


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2019 in Processes
Verified
Journal Article
Open access
PDF file
HNHarri Nieminen
Harri Nieminen
ALArto Laari
Arto Laari
Tuomas KoiranenTuomas Koiranen
Tuomas Koiranen
Synthesis of methanol from recirculated CO2 and H2 produced by water electrolysis allows sustainable production of fuels and chemical storage of energy. Production of renewable methanol has, however, not achieved commercial breakthrough, and novel methods to improve economic feasibility are needed. One possibility is to alter the reaction route to methanol using catalytic alcoholic solvents, which makes the process possible at lower reaction temperatures. To estimate the techno-economic potential of this approach, the feasibilities of the conventional gas-phase process and an alternative liquid-phase process employing 2-butanol or 1-butanol solvents were compared by means of flowsheet modelling and economic analysis. As a result, it was found that despite improved methanol yield, the presence of solvent adds complexity to the process and increases separation costs due to the high volatility of the alcohols and formation of azeotropes. Hydrogen, produced from wind electricity, was the major cost in all processes. The higher cost of the present, non-optimized liquid-phase process is largely explained by the heat required in separation. If this heat could be provided by heat integration, the resulting production costs approach the costs of the gas-phase process. It is concluded that the novel reaction route provides promising possibilities, but new breakthroughs in process synthesis, integration, optimization, and catalysis are needed before the alcoholic solvent approach surpasses the traditional gas-phase process.

15 June 2021 in Processes
Verified
Journal Article
Open access
PDF file
JRJenna Ruokonen
Jenna Ruokonen
HNHarri Nieminen
Harri Nieminen
ADAhmed Rufai Dahiru
Ahmed Rufai Dahiru
ALArto Laari
Arto Laari
Tuomas KoiranenTuomas Koiranen
Tuomas Koiranen
Mika HuuhtanenMika Huuhtanen
Mika Huuhtanen
The ambitious CO2 emission reduction targets for the transport sector set in the Paris Climate Agreement require low-carbon energy solutions that can be commissioned rapidly. The production of gasoline, kerosene, and diesel from renewable methanol using methanol-to-olefins (MTO) and Mobil’s Olefins to Gasoline and Distillate (MOGD) syntheses was investigated in this study via process simulation and economic analysis. The current work presents a process simulation model comprising liquid fuel production and heat integration. According to the economic analysis, the total cost of production was found to be 3409 €/tfuels (273 €/MWhLHV), corresponding to a renewable methanol price of 963 €/t (174 €/MWhLHV). The calculated fuel price is considerably higher than the current cost of fossil fuels and biofuel blending components. The price of renewable methanol, which is largely dictated by the cost of electrolytic hydrogen and renewable electricity, was found to be the most significant factor affecting the profitability of the MTO-MOGD plant. To reduce the price of renewable fuels and make them economically viable, it is recommended that the EU’s sustainable transport policies are enacted to allow flexible and practical solutions to reduce transport-related emissions within the member states.

7 February 2022 in Chemical Engineering Science
Verified
Journal Article
Open access
PMPavel Maksimov
Pavel Maksimov
HNHarri Nieminen
Harri Nieminen
ALArto Laari
Arto Laari
Tuomas KoiranenTuomas Koiranen
Tuomas Koiranen

16 July 2022 in Chemical Engineering and Processing - Process Intensification
Verified
Journal Article
Open access
HNHarri Nieminen
Harri Nieminen
PMPavel Maksimov
Pavel Maksimov
ALArto Laari
Arto Laari
VVVirpi Väisänen
Virpi Väisänen
AVAri Vuokila
Ari Vuokila
TKTuomas Koiranen
Tuomas Koiranen

1 January 2022 in Chemical Engineering Research and Design
Verified
Journal Article
Open access
SASoheil Aghajanian
Soheil Aghajanian
VRVesa Ruuskanen
Vesa Ruuskanen
HNHarri Nieminen
Harri Nieminen
ALArto Laari
Arto Laari
MHMarkus Honkanen
Markus Honkanen
Tuomas KoiranenTuomas Koiranen
Tuomas Koiranen

31 August 2022 in Frontiers in Chemical Engineering
Verified
Journal Article
Open access
HNHarri Nieminen
Harri Nieminen
PMPavel Maksimov
Pavel Maksimov
ALArto Laari
Arto Laari
TKTuomas Koiranen
Tuomas Koiranen
CO2absorption into aqueous potassium glycinate in a polypropylene membrane contactor was modelled using two alternative models: a 1D model and a 1D-2D model considering axial diffusion in the liquid phase. Models were fitted to experimental data using various fitting parameters, which were compared. Experiments were carried out under industrially relevant conditions characterized by CO2-loaded absorbent entering the contactor and high degree of reactant conversion over the contactor. The experiments and models were developed to specifically investigate the effect of changes in solution CO2loading at contactor inlet. This is a key issue rarely reported in the literature, especially for amino acid salt solutions. Unexpectedly, the 1D model was found to explain the experimental results more accurately compared to the more complex 1D-2D model. This was the case for the base models, using only the membrane mass transfer coefficient as a fitting parameter, and the final models introducing secondary fitting parameters. The 1D model was found to show the best experimental fit following fitting of the equilibrium constant used in prediction of the enhancement factor. The 1D-2D model showed the best fit following correction of potassium glycinate diffusivity as a function of solution CO2loading. The 1D approach was found to result in a computationally effective model with good fit to the present experimental data. This model provides a good basis for further development and could be considered for use in contactor design and optimization studies. It is suggested that various model simplifications led to inability of the 1D-2D model to accurately predict the experimental results.