It is difficult to find information about how the microAeth® AE51 performs, in spite of its versatility for about a decade in various research fields such as black carbon measurements and personal exposure studies. Stimulated by this, we conducted real-time tests for indoor aerosol in order to provide performance characteristics toward proper usage. We calculated the attenuation (ATN) using the reference signal together with the sensing signal to compare it with the ATN recorded in a microAeth® AE51. Performance was evaluated under extremely low concentration through the zero test, using filtered clean air. Ten-day-long continuous measurements were done for both indoor aerosol and filtered particle free air to examine the feasibility of microAeth® AE51 in an indoor use. Generally, MicroAeth® AE51 exhibited excellent performance, though it showed relatively low performance under some conditions. Noise was intensified while it was directly connected to a power adaptor. Another issue includes the occurrence of negative concentrations for extremely clean air. The noise amplification turned out to be related to a power source independent on the internal battery, and it was able to be removed by post-processing. Uncertainty analysis was carried out to better understand the origin of unwanted noise. Technical perspective of a proper usage will be addressed with regard to what will play a role for a long-term monitoring.
1 January 2019 in Aerosol and Air Quality Research
The international journal of Aerosol and Air Quality Research (AAQR) covers all aspects of aerosol science and technology, atmospheric science and air quality related issues.
In this study, a photothermal interferometer was developed, based on a folded-Jamin polarization instrument with refractive-index sensitive configuration, in order to characterize light-absorbing aerosols. The feasibility of our interferometric technique was demonstrated by performing photothermal spectroscopy characterizing spark-generated black carbon particles with atmospherically relevant concentrations and atmospheric aerosols in a metropolitan area. The sensitivity of this interferometric system for both laboratory-generated aerosols and atmospheric aerosols was ~ 1 (μg/m3)/μV, which is sufficient for the monitoring of black carbon aerosol in urban areas.
We demonstrated the relationships between elemental carbon (EC) and EC fractions during evolved gas analysis (EGA) for PM2.5 sampled at KOREATECH from 29 March 2018 to 12 May 2018. The EC concentrations were compared to the concentrations of equivalent black carbon to confirm that the level of EC concentrations analyzed in this study was valid. Among various EC fractions and their combination, EC1+EC3 fractions were best correlated with the EC concentrations. Especially, dominant EC fraction was related with the dependence of carbon oxidation quantity on the oxidation temperature. We also examined the relationships between pyrolytic carbon (PyC) and EC concentration with respect to the split time. PyC was correlated with the split time in the phase of oxygen-helium mixture. PyC was close to zero for the split time in the helium phase. It is novel, as far as the authors know, that the correlation between PyC and the split time under NIOSH 5040 protocol was reported with regard to EGA. We believe that our study helps to identify what causes uncertainty in the quantification of PyC.
The vertical profile of equivalent black carbon (eBC) concentrations has been measured together with the temperature up to 130 m above ground level at several locations. A hexacopter was deployed for the measurement of eBC, and the temperature on typical days in winter, spring, summer and early autumn. We observed high eBC concentrations between 10 m and 90 m above ground level, which was related to the vertical distribution of temperature. We examined that the measurement noise could be reduced by using a box-average scheme. Furthermore, the negative values at low eBC concentration could be removed for an averaging time of 30 min or longer.