The tightness and stability of the pipe connections are particularly important for pressurized environments. Pipe fittings are one of the most important subgroups of fittings. These fittings are not only used for connection purposes, but these fasteners may also have additional purposes such as sealing. In this study, a simulation model of the pipe fitting was created to evaluate the sealing performance. The obtained forces in the simulations were then used in the modified version of the classical bolt-tightening moment equation. In this equation, the additional parameter, R, is embedded. This parameter depends on the distance from the center (torque arm, x), slope parameter (k), and friction constant (S) between the body or nut and the ring parts. The consistency and applicability of the new equation were discussed by comparing the obtained results with the experimental results. It has been observed that there is a good agreement between the comparative results.
In this paper, interlaminar fracture behavior of woven-fabric-reinforced glass/epoxy composites has been investigated experimentally and numerically. The mechanical properties of this composite were studied and Mode I (Tensile Opening) DCB (Double Cantilever Beam) tests were performed on Fiber Reinforced Composite (FRP) specimens to determine the delaminating resistance of composite laminates used for structural applications. Techniques for measuring the interlaminar fracture toughness, KIC data of woven-fabric-reinforced glass/epoxy composite materials, are highlighted under the consideration of ASTM Standard D5528–01 and test methods ISO 15024, DIN EN ISO 75-1 and DIN EN ISO 75-3. The obtained test results were apparently consistent with the assumptions of the CCM (Compliance Calibration Method) that was used to obtain the interlaminar critical SERR (strain energy release rate), GIC. Finite element analysis was conducted to validate the closed form solution. The use of obtained mechanical properties data in finite element analyses utilizing fracture mechanics are examined. Results show a good agreement between experimental and numerical solutions.