Electrical discharge machining (EDM) has recently become popular in manufacturing industries but numerous issues are associated with it like recast layer, surface roughness, and overcut (OC) that result in poor quality and rejection by customers. To overcome these issues, manufacturers are looking for precise methods of machining. In this line, current study aims to investigate the effect of machining input characteristics upon OC during machining of nickel-based alloy, i.e., Inconel 718 by means of EDM. This will help in reduction of OC and improvement in precision. Test experiments were designed as per Taguchi’s DOE approach and conducted by varying different machining input characteristics namely tool diameter discharge current, pulse-on time, pulse-off time tool rotation and depth of hole. Rotary copper tool electrode is used as the drilling tool. Microstructure of drilled hole over the work piece is observed and distinguished through scanning electron microscopy (SEM) images and same was used for OC measurement. Further analysis of variance has been applied for discovering optimum factors for minimum OC. It can be concluded from the test results that discharge current and pulse on time are most influencing factors affecting OC. This study will help the industry to improve precision in manufacturing which can enhance the quality of products.
Cryogenically treated electrically conductive tool-electrodes have been used for machining of super alloys. This enhanced and modifies the properties of tool-electrode, which improves machinability of EDMed alloys. Present study determines the effects of cryogenic treatment on performance of Cu-electrode for hole making on Inconel-718 super alloy. Cu-tool electrodes (having helical-threads) have being given rotational motion for effective flushing of debris, reducing formation of recast layer with less tool wear. EDM performance measure viz. tool wear rate has been evaluated against the variation of tool diameter, discharge current, pulse-on time, pulse-off time, tool rotation and depth of hole using Taguchi's method. The results reported that hole depth and discharge current are the two most significant process parameters effecting tool wear rate (TWR). It is also found that tool wear rate obtained lesser for cryogenically treated tool electrode.
Inconel-718 is a nickel based super alloy (difficult-to-cut material) used in aerospace industry. Analysis of machining performances viz. Over Cut (OC) & Surface Roughness (SR) for Inconel-718 through rotary Cu-pin tool electrode have been carried out. Peak current (Ip), pulse-on time (Ton), tool rotation (Nt) & hole depth (h) were used as input factors in Electrical Discharge Drilling (EDD) of Inconel-718 work-piece. Effect of input parameters on performance characteristics like OC & SR were found by Taguchi’s L9 (34) orthogonal array. It is reveals that Ip & h are most affecting factors that affects OC & SR. The Scanning Electron Microscope image was used to measure diameter of hole on work-piece after machining.