Ako Hama

Ako Hama

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in Heliyon
Verified
Journal Article
Open access
AHAko Hama
Ako Hama
RARafea Hashim Al-Suhili
Rafea Hashim Al-Suhili
ZGZeren Jamal Ghafour
Zeren Jamal Ghafour
Sulaimania is a City located in Kurdistan region in the north of Iraq. The city is facing a lack of water, and it will reach a very critical condition shortly. One of the potential solutions is to reuse the treated wastewater for non-direct human uses such as irrigation, washing, firefighting, groundwater recharging, and others. There is no sewage treatment plant in the city. The wastewater flows into a stream through some sewer outlets, and that causes big environmental issues. Decentralized wastewater treatment units (DTUs) are suggested to solve the issue. The treated wastewater will be used for the irrigation of the green areas of the city. The selected plant type is Extended Aeration treatment system, which is recommended for residential areas. Specifying the locations of the treatment units is very important from environmental, social and technical aspects. The main objective of this study is to select the best suitable places for the DTUs. Preliminary selections of 134 nominated areas for DTU locations were made in different places in the city. The locations are distributed into 10 groups near the main sewer pipes of the city. A model is created to evaluate those selected locations and eliminate the non-suitable locations by using GIS software integrated with the Analytical Hierarchy Process (AHP). Five criteria were used in the model, which are, (1) The size of the available lands, (2) The distance from the decentralized units to the green areas (3) Population density around the decentralized treatment unit locations, (4) The slope of the land and (5) Depth of the main sewer pipe at the nominated area. In addition, the model adopted two restriction factors, which are: (1) The distance from the decentralized treatment unit to the buildings should not be less than 10 m and (2) The distance between the main sewer pipes and the treatment units are taken to be <50 m. The results of the suitability analysis produced six classes of suitability levels of the nominated areas started from restricted to extremely suitable. The suitability percentages of the 6 classes of the total nominated areas were found to be; 8.5% (6.95 ha) restricted, 0.4 % (0.23 ha) moderately suitable, 12.8% (10.50 ha) suitable, 38.8% very suitable (31.60 ha), 32.2% (26.33 ha) highly suitable and 7.3% (5.92 ha) extremely suitable. Each nominated area has more than one suitability class. Normalized Weighted Average (NWAV) of the suitability level percentage of each nominated area is found. The values of the NWAV are ranged from 0.0 to 1.0, and the selection of final DTUs locations will be for areas that have NWAV larger than 0.5. Optimum 30 suitable locations are selected out of the 134 nominated areas.

8 July 2017 in Water Science & Technology
Verified
Journal Article
Open access
PDF file
SFSeef Saadi Fiyadh
Seef Saadi Fiyadh
Mohammed AlSaadiMohammed AlSaadi
Mohammed AlSaadi
MAMohamed AlOmar
Mohamed AlOmar
SFSabah Saadi Fayaed
Sabah Saadi Fayaed
AHAko Hama
Ako Hama
Ahmed ElshafieAhmed Elshafie
Ahmed Elshafie
The main challenge in the lead removal simulation is the behaviour of non-linearity relationships between the process parameters. The conventional modelling technique usually deals with this problem by a linear method. The substitute modelling technique is an artificial neural network (ANN) system, and it is selected to reflect the non-linearity in the interaction among the variables in the function. Herein, synthesized deep eutectic solvents were used as a functionalized agent with carbon nanotubes as adsorbents of Pb2+. Different parameters were used in the adsorption study including pH (2.7 to 7), adsorbent dosage (5 to 20 mg), contact time (3 to 900 min) and Pb2+ initial concentration (3 to 60 mg/l). The number of experimental trials to feed and train the system was 158 runs conveyed in laboratory scale. Two ANN types were designed in this work, the feed-forward back-propagation and layer recurrent; both methods are compared based on their predictive proficiency in terms of the mean square error (MSE), root mean square error, relative root mean square error, mean absolute percentage error and determination coefficient (R2) based on the testing dataset. The ANN model of lead removal was subjected to accuracy determination and the results showed R2 of 0.9956 with MSE of 1.66 × 10−4. The maximum relative error is 14.93% for the feed-forward back-propagation neural network model.

1 June 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
AHAko Hama
Ako Hama
TTTwana A. Tahir
Twana A. Tahir
BABayad Jamal Ali
Bayad Jamal Ali
Municipal solid waste management became a major challenge due to the population growth, change of lifestyle in Sulaimania city, especially since the urban expansion increased from 2003, and when many villages in the countryside had already became a part of the city. The major part of generating solid waste in Sulaimania disposed in the Tanjaro area (an open dumping area southeast of Sulaimania city) without any treatment or proper landfilling. In this research, the compositions of generating solid waste of Sulaimania city and its properties were determined. Also, in this research, it was found that household waste generation is threatening the environment of Sulaimania city due to the huge amount of the produced leachate of solid waste which flowing into the Tanjaro dumping area and ultimately contaminating groundwater, surface and subsurface soil there. This research covered 12 different subzone areas within 5 major zones across the city a covering nearly 300 house samples. Also collected solid waste samples were categorized into the kitchen, plastic, glass, electronic and some other types of solid wastes. The results showed that the number of houses generating more than 2 kg of solid waste per day is higher than those with less than 1kg generated solid waste. It has also been inferred that the highest composition ratio of household solid waste was kitchen type and reached (63.1%) followed by plastic-type solid waste (10.2%), cardboard (5.4%), cans and other metals (2.8%), Glass waste (2.7%) and E-waste (0.1%), other wastes such as textile, nylon, wood and lethal around (15.7%). Besides that, the results showed that the amount of the waste is seasonally changing, for example, the amount of solid waste from April to October is higher than other months due to increasing human activities for producing solid waste. Furthermore, this study covered a survey of the main medical waste from 25 clinics across Sulaimania city and counted the main waste contributed elements of the medical waste that produced. The variation in the generation rate, varied and excuses for this variation clearly stated. Also, the clinic medical waste generation was also investigated for their constituents and quantity and also the possibility of its segregation and ways to dispose of it. All the clinics private and public ones were investigated and studied for having chimneys and the possibilities of air pollution due to the burning of the medical waste.

14 November 2022 in Engineering and Technology Journal
Verified
Journal Article
Open access
PDF file
AAAwa Ahmad
Awa Ahmad
AHAko Hama
Ako Hama
IAImzahim A. Alwan
Imzahim A. Alwan
Renovation of the naturally existing area for ecotourist and investments that attracting site-visitors, picnickers and tourists for Iraq, Kurdistan Region, Sulaimani need to promote a reliable decision-making technique so as to raise the level of the tourist-based economy. In this study, the most available public well known and recognized tourist and picnic area by the people and associated governmental directories were studied and assessed for their tourism reliability and capacity. The study area of this research covered tourist area and they were forty-three (43) locations and all the related data collected, analyzed and categorized as main and sub-main criterions. The analytical hierarchy process (AHP) has been used for assessment of that area which was ranked accordingly from the highest to lowest capacity and efficiency’s reliability of tourism. The opinion of experts from tourism agencies, related tourism officials and people from the local area also taken into consideration and translated and used in the AHP assessment tool. Weight factors of the main and sub-main criterions were founded and analyses for their inconsistency. The main criterions and their pairwise weights as per AHP assessment were climate, available green area, root distance, easy of transportation, essential requirements, entertainment tools, provided security and healthcare, respectively.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
AHAko Hama
Ako Hama
This research focus on the urban land uses and covers techniques that have used for classification and mapping which is considered to be one of the main aspects of the decision making in the developing countries that urbanized widespread. Land use and land cover LULC classification and mapping are two aspects of decision making in developing countries with widespread urbanization, and can be used in climate change, agriculture, ecology, water quality, improving living conditions, and identifying and developing regional development plans. This classification and mapping used in climate change, agriculture, ecology, water quality, improving living standards and identifying and developing plans for regional development. Remote sensing imagery have been used for land cover and land uses classification and urban land mapping. However, there is limitation due to hardly identifying urban land use and land function issues due to the rare of high-resolution urban land use maps availability along with having a low accuracy. In this paper several different methods have been discussed adopted for this purpose including the use data from multisource remote sensing with WeChat mobile application data, Landsat 8 Imagery with open social data, and area of interest AOI method. All of these methods have proved to be successful in their area in urban land use mapping and LULC classification by giving an improved accuracy in mapping and classification.

1 October 2022 in SULAIMANI JOURNAL FOR ENGINEERING SCIENCES
Verified
Journal Article
Open access
AMAkber Muhammed
Akber Muhammed
AHAko Hama
Ako Hama
Water quality index (WQI) is an important technique used for the evaluating and classifying water quality of supplied water, by summarizing large number of parameters from the result of variety tests of water into less number and terms Water quality index (WQI) value can be determined. Management of water quality is not so easy and simple, it needs to work with a lot of data. In this study evaluating of water quality of (Sulaimani city, KR, Iraq) is presented by using Canadian Council of Ministers of the Environment (CCME). The study conducted by monitoring long term water quality data over past eleven years, collected from 17 sampling points, tanks from which potable water supplied to all of the city residents, located in the (Sulaimani city, KR, Iraq). To obtain the CCME WQI value twelve parameters used : PH, Total dissolved solid (TDS), Chloride (Cl-1), Calcium (Ca), Sodium (Na), Potassium (K), Magnesium (Mg), Total hardness (TH), Total Alkalinity, Chloride (Cl2), Electric conductivity (EC), Sulphate (SO4-2).The obtained patterns present different water quality situations, WQI values ranged from good to excellent, based on the result obtained and analyzed using the from of WQI, it is revealed that the value of WQI ranged from (82) to (94) over the past 11 years, it means the main source of water supplied to the city which is Dokan lake is relatively high and clean as it is over a mountain watershed area.