Jieqing Fan

Jieqing Fan


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SJSun Jiamin
Sun Jiamin
FSFengJie Sun
FengJie Sun
Jieqing FanJieqing Fan
Jieqing Fan
YLYutu Liang
Yutu Liang
With the rapid development of the photovoltaic industry, fault monitoring is becoming an important issue in maintaining the safe and stable operation of a solar power station. In order to diagnose the fault types of photovoltaic array, a fault diagnosis method that is based on the Least Squares Support Vector Machine (LSSVM) in the Bayesian framework is put forward. First, based on the elaborate analysis of the change rules of the output electrical parameters and the equivalent circuit internal parameters of photovoltaic array in different fault states, the input variables of the photovoltaic array fault diagnosis model are determined. Second, through the LSSVM algorithm in the Bayesian framework, the fault diagnosis model based on the output electrical parameters and the equivalent circuit internal parameters of the photovoltaic array is built, which can effectively detect the photovoltaic array faults of short circuit, open circuit, and abnormal aging. Then, the simulation model is built to verify the validity of the LSSVM algorithm in the Bayesian framework by comparing it with the model of LSSVM and the Support Vector Machine (SVM). Moreover, a 5 × 3 photovoltaic array and a reference photovoltaic string are established and experimentally tested to validate the performance of the proposed method.

10 July 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Jieqing FanJieqing Fan
Jieqing Fan
CLChao Liu
Chao Liu
YLYajing Lv
Yajing Lv
JHJing Han
Jing Han
JWJian Wang
Jian Wang
The critical frequency foF2 of the ionosphere F2 layer is one of the most important parameters of the ionosphere. Based on the Elman neural network (ENN), this paper constructs a single station forecasting model to predict foF2 one hour ahead. In order to avoid the network falling into local minimum, the model is optimized by the improved particle swarm optimization (IPSO). The input parameters used in the model include local time, seasonal information, solar cycle information and magnetic activity information. Data of the Wuhan Station from 2008 to 2016 were used to train and test the model. The prediction results of foF2 show that the root mean square error (RMSE) of the Elman neural network model is 4.30% lower than that of the back-propagation neural network (BPNN) model. The RMSE is further reduced by 8.92% after using the IPSO to optimize the model. This indicates that the Elman neural network model optimized by the improved particle swarm optimization is superior to the BP neural network and Elman neural network in the forecast of foF2 one hour ahead at Wuhan station.

11 July 2023 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
WLWei Liu
Wei Liu
JHJianhong Hao
Jianhong Hao
FZFang Zhang
Fang Zhang
QZQiang Zhao
Qiang Zhao
Jieqing FanJieqing Fan
Jieqing Fan
ZDZhi-Wei Dong
Zhi-Wei Dong
The actual working environment of spacecraft in space is highly harsh, among which space radiation is the primary harmful environmental factor leading to spacecraft failure in orbit. This study investigates field emission, multipacting, and outgassing ionization as effects of electromagnetic radiation on the thermal control layer (TCL) of spacecraft. Based on the particle-in-cell (PIC) simulation method coupled with Monte Carlo collisions (MCCs), a 2-D simulation model of particle motion in a vacuum is created to study the evolution of the point discharge process of electromagnetic irradiation breakdown to generate plasma. Simulated and analyzed results show the impact of various microwave amplitudes, frequencies, and gas densities on the interface breakdown of thermal control materials. According to the findings, the number of primary electrons generated and the energy attained by them in the microwave field increase with the electric field, speeding up secondary electron emission, and gaseous collision ionization; the time it takes for the electrons to return to bombard the surface of the material under the influence of the microwave field is shortened with increasing microwave frequency, which promotes electron multipacting; the frequency of collisions and ionization increases with gas density, which facilitates the occurrence of avalanche ionization. After the avalanche, there is a large energy deposition of plasma on the surface of the thermally controlled material, which results in a quick rise in temperature and subsequent damage.

20 March 2024 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
XCXiangchun Cao
Xiangchun Cao
JLJuan Liu
Juan Liu
JHJianhong Hao
Jianhong Hao
QZQiang Zhao
Qiang Zhao
BXBixi Xue
Bixi Xue
ZDZhiwei Dong
Zhiwei Dong
In this paper, the propagation loss of 0.14 THz signal propagating for 27 km at sea is measured experimentally and compared with the simulation results of model in International Telecommunication Union-Radiocommunication Sector (ITU-R). The results show that the average difference between the simulated and experimental values of signal received power is -5.2 dB, and all the simulation results overestimate the propagation loss. Considering that evaporation duct is ubiquitous in the marine atmosphere and may affect the propagation characteristics of terahertz wave, a new computational model is proposed. More than half of the simulated values based on this model agree well with the measured data, with an average difference of -1.3 dB, but the maximum difference of a single point reaches -18.6 dB, which is mainly caused by the sensitivity of the model to meteorological parameters. The “waveguide effect” in the evaporation duct environment is further simulated by adjusting the transmit antenna height from 29 m to 10 m. At this time, although the atmospheric absorption loss increases by 1 dB on average, the total path loss decreases by 5.4 dB on average, which effectively reduces the propagation loss and makes it possible for the long-range transmission of terahertz wave.

2 December 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
Jieqing FanJieqing Fan
Jieqing Fan
YLYao Li
Yao Li
FZFang Zhang
Fang Zhang
JHJianhong Hao
Jianhong Hao
ZDZhi-Wei Dong
Zhi-Wei Dong
QZQiang Zhao
Qiang Zhao
To study the electromagnetic radiation effect of a thermal control layer (TCL) on the surface of general spacecraft in a space environment, a model of a metal aluminum film material irradiated with microwaves was established, particle-in-cell (PIC)-Monte Carlo collisions (MCCs) simulation was used, and the processes of field emission, multipacting, outgassing, and impact ionization on the surface of thermal control materials were simulated. By comparing the primary-, secondary-, and impact ionization electrons produced under different gas densities, the influence of the process on metal aluminum film was analyzed. The simulation results show that the field emission, multipacting, and collisional ionization on the material surface all strengthened when the outgassing density exceeded the threshold value, and outgassing collision ionization was dominant among them. Avalanche ionization occurred on the material surface to generate plasma, which absorbs electromagnetic wave energy, and the total increase in the energy of ions and electrons may cause damage to the aluminum film, which is very important in its practical application.

2 December 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
Jieqing FanJieqing Fan
Jieqing Fan
YLYao Li
Yao Li
FZFang Zhang
Fang Zhang
JHJianhong Hao
Jianhong Hao
ZDZhi-Wei Dong
Zhi-Wei Dong
QZQiang Zhao
Qiang Zhao
To study the electromagnetic radiation effect of a thermal control layer (TCL) on the surface of general spacecraft in a space environment, a model of thermal control material irradiated with microwaves was established, a particle-in-cell (PIC)-Monte Carlo collisions (MCC) simulation was used, and the processes of field emission, multipacting, outgassing, and impact ionization on the surface of thermal control materials were simulated. By comparing the primary electrons, secondary electrons, and impact ionization electrons produced under different field intensities and frequencies of electromagnetic waves, different compositions of outgassing, and different thermal control materials, the influencing factors and critical thresholds of avalanche ionization were obtained. The simulation results show that whether avalanche ionization occurs in outgassing on the surface of the TCL is affected by the electromagnetic wave amplitude, electromagnetic wave frequency, outgassing composition, and the material of the TCL. This provides a theoretical reference for the safe operation of spacecraft.