Statistical process control (SPC) is an important tool of enterprise quality management. It can scientifically distinguish the abnormal fluctuations of product quality. Therefore, intelligent and efficient SPC is of great significance to the manufacturing industry, especially in the context of industry 4.0. The intelligence of SPC is embodied in the realization of histogram pattern recognition (HPR) and control chart pattern recognition (CCPR). In view of the lack of HPR research and the complexity and low efficiency of the manual feature of control chart pattern, an intelligent SPC method based on feature learning is proposed. This method uses multilayer bidirectional long short-term memory network (Bi-LSTM) to learn the best features from the raw data, and it is universal to HPR and CCPR. Firstly, the training and test data sets are generated by Monte Carlo simulation algorithm. There are seven histogram patterns (HPs) and nine control chart patterns (CCPs). Then, the network structure parameters and training parameters are optimized to obtain the best training effect. Finally, the proposed method is compared with traditional methods and other deep learning methods. The results show that the quality of extracted features by multilayer Bi-LSTM is the highest. It has obvious advantages over other methods in recognition accuracy, despite the HPR or CCPR. In addition, the abnormal patterns of data in actual production can be effectively identified.
Aiming at the problem of poor robustness of the intelligent diagnostic model, a fault diagnosis model of rolling bearing based on a multi-dimension input convolutional neural network (MDI-CNN) is proposed. Compared with the traditional convolution neural network, the proposed model has multiple input layers. Therefore, it can fuse the original signal and processed signal—making full use of advantages of the convolutional neural networks to learn the original signal characteristics automatically, and also improving recognition accuracy and anti-jamming ability. The feasibility and validity of the proposed MDI-CNN are verified, and its advantages are proved by comparison with the other related models. Moreover, the robustness of the model is tested by adding the noise to the test set. Finally, the stability of the model is verified by two experiments. The experimental results show that the proposed model improves the recognition rate, robustness and convergence performance of the traditional convolution model and has good generalization ability.
17 August 2020 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In order to improve the prediction accuracy of performance degradation trends of rolling bearings, a method based on the joint approximative diagonalization of eigen-matrices (JADE) and particle swarm optimization support vector machine (PSO-SVM) was proposed. Firstly, the features of the time-domain, frequency-domain, and time-frequency-domain eigenvalues of the vibration signal corresponding to the entire life cycle of the rolling bearing are extracted, and the performance degradation parameters are initially selected by using the monotonicity parameter. Then, a fusion feature that can effectively represent the performance degradation is obtained by using the JADE method. Finally, the prediction model based on PSO-SVM is constructed to predict the performance degradation trend. By comparing with the prediction results obtained by other classical methods, it can be proved that this method can accurately predict the performance degradation trend and the remaining useful life (RUL) of rolling bearings under small sample sizes, and has considerable application potentials.
Control charts are an important tool for statistical process control (SPC). SPC has the characteristics of fluctuation and asymmetry in the symmetrical coordinate system. It is a graph with control limits used to analyze and judge whether the process is in a stable state. Its fast and accurate identification is of great significance to the actual production. The existing control chart pattern recognition (CCPR) method can only recognize a control chart with fixed window size, but cannot adjust with different window sizes according to the actual production needs. In order to solve these problems and improve the quality management effect in the manufacturing process, a new CCPR method is proposed based on convolutional neural network (CNN) and information fusion. After undergoing feature learning, CNN is used to extract the best feature set from the control chart, while at the same time, expert features (including one shape features and four statistical features) are fused to complete the CCPR. In this paper, the control charts of 10 different window sizes are generated by the Monte Carlo simulation method, and various data patterns are drawn into images, then the CCPR model is set up. Finally, simulation experiments and a real example are addressed to validate its feasibility and effectiveness. The results of simulation experiments demonstrate that the recognition method based on CNN can be used for pattern recognition for different window size control charts, and its recognition accuracy is higher than the traditional ones. In addition, the recognition method based on information fusion performs much better. The result of a real example shows that the method has potential application in solving the pattern recognition problem of control charts with different window sizes.
7 August 2025 in Reliability Engineering & System Safety