The creep properties of directionally solidified superalloys are largely influenced by the degradation rate of the γ/γ’ microstructure and the dislocation motion, which exhibit distinct mechanisms under varying temperature and stress conditions. In this study, the creep deformation mechanisms and microstructural evolution of a directionally solidified nickel-based superalloy in the longitudinal (L) and transverse (T) orientations at 850 °C are comprehensively investigated. Creep testing and characterization of the dislocation structure revealed superior creep properties in the L direction compared to the T direction. The creep mechanism in the L direction involves the activation of multiple {111} slip systems, shearing the γ’ precipitates through antiphase boundaries (APBs). Conversely, the creep mechanism in the T direction involves the activation of {111} slip systems, shearing the γ’ precipitates through a superlattice intrinsic stacking fault (SISF) and forming slip bands inclined to the stress axis. Aluminum was identified as the controlling element for the γ’ rafting. The longitudinal specimens exhibited P-type rafting due to the activation of multiple slip systems and sufficient plastic strain flow from the dislocation motion. In contrast, the transverse specimens show little rafting due to limited slip system activation. These findings can serve as a reference for better understanding the anisotropy of directionally solidified superalloys and provide a basis for their broader application.
This paper used carbonyl iron powder and carbide powder as raw materials to prepare high carbon M2 powder metallurgy high-speed steel through the cold compaction-sintering method. The evolution of microstructure and properties of the material at different sintering temperatures were emphatically studied. The results show that: The microstructure of the samples is that different types of carbides are uniformly dispersed in the matrix. Since the dissolution of the original carbides is a continuous process, the precipitated carbides are constantly changing with the increase of sintering temperature. Moreover, M2 steel achieves sintering densification near the solidus temperature, the sintering window is expanded to 10–15°C. In the sintering temperature range, the carbides in the samples are fine and uniformly dispersed. The material sintered at 1225°C has the best mechanical properties, with a bending strength of 2754 MPa, and a hardness of 51 HRC. In addition, mechanical properties are greatly improved by heat treatment.
In this study, composites CoFe2O4/Fe were successfully synthesized by in situ oxidation, and their composition, structure, and magnetic properties have been investigated. According to the analysis of X-ray photoelectron spectrometry measure results, the cobalt ferrite insulating layer was completely coated on the surface of Fe powder particles. The evolution of the insulating layer during the annealing process has been discussed, which is correlated to effects on the magnetic properties of the composites CoFe2O4/Fe. The amplitude permeability of the composites reached a maximum of 110, and their frequency stability reached 170 kHz with a relatively low core loss of 253.6 W/kg. Therefore, the composites CoFe2O4/Fe has potential application in the field of integrated inductance and high-frequency motor, which is conducive to energy conservation and carbon reduction.