Unconventional tight oil and gas resources, including shale oil and gas, have become the main focus for increasing reserves and production. The safe and efficient development of unconventional oil and gas is a crucial demand for the energy development strategy. Deep tight oil and gas resource development generally adopts horizontal well drilling methods. During drilling, especially in long horizontal sections, the high temperature frequently causes failures of downhole drilling tools and rotary steering tools. The temperature rises sharply during rock breaking with the drill bit. Existing wellbore heat transfer models do not fully consider the impact of heat generated by the drill bit on the wellbore temperature field. This paper aims to experimentally study the temperature rise law of the cutting tooth of the bottom polycrystalline diamond compact (PDC) bit during rock breaking. A set of evaluation devices was developed to study the temperature field distribution characteristics at the bottom of the PDC bit during rock breaking under different experimental conditions. The results indicate that the flow rate of drilling fluid, bit rotation speed, and weight on bit (WOB) significantly affect the distribution of the temperature field at the well bottom. This experimental research on the temperature field distribution characteristics at the bottom of the PDC bit during rock breaking helps reveal the heat transfer characteristics of the long horizontal section wellbore, guide the optimization of drilling parameters, and develop temperature control methods. It is of great significance for the advancement of efficient development technologies for unconventional resources in long horizontal wells.

On the basis of the observation of rock cores and cuttings, combining the information from thin section identification, physical properties analysis, scanning electron microscopy, X-ray diffraction, etc., the characteristics and controlling factors of the tight reservoir in the Permian Lucaogou Formation of the Yongfeng sub-sag of the Chaiwopu sag have been studied. Based on the analysis, the Lucaogou Formation in the study area can be divided into two lithological sections. The tight sandstone reservoir, characterized by low porosity and low permeability, is mainly developed in the upper section of the Lucaogou Formation. The lithology of the tight reservoirs is mainly lithic sandstone with low compositional and structural maturity. The reservoir space types mainly consist of secondary pores, including intergranular dissolution pores, intragranular dissolution pores and fractures, and the primary pores are severely destroyed. The main controlling factors of reservoirs include sedimentary facies, lithology, diagenesis, later tectonic movements and fractures, and the latter two factors have a significant impact on improving reservoir physical properties and seepage capacity. The tight reservoir has high brittleness and low water sensitivity, which is very conducive to large-scale hydraulic fracturing to transform the reservoir and improve oil and gas production capacity.

By systematically analyzing the natural gas composition, carbon isotopes, and source rock characteristics in the Yongfeng sub-sag of the Bogda Mountain front belt, natural gas characteristics were determined, and the genetic types and sources of natural gas were investigated. The research results indicate that methane is the main component of natural gas in the Yongfeng sub-sag, with low levels of heavy hydrocarbons and a high drying coefficient. These characteristics make it dry gas, which refers to natural gas with a methane content of over 95%. The ethane carbon isotope δ¹³C₂ of natural gas is −28.5‰ and belongs to oil type gas. The methane carbon isotope δ¹³C₁ of natural gas is −58.6‰~−59.4‰, has a relatively depleted methane carbon isotope value, shows significant differences from the surrounding natural gas methane carbon isotope, and belongs to the category of biogenic gas. The Permian Lucaogou Formation is the main source rock in the study area, with good organic matter abundance. The microscopic components of kerogen are mainly composed of sapropelic formations and the organic matter type is I–II₁. The source rock has a high maturity and has reached the mature stage, mainly consisting of oil and wet gas. The ethane carbon isotope of natural gas in the Yongfeng sub-sag shows as oil type gas, which is consistent with the kerogen type of the Lucaogou Formation source rocks, indicating that the natural gas mainly comes from the Lucaogou Formation source rocks. Based on comprehensive data and information on natural gas composition, carbon isotopes, and burial history of the source rocks, it is believed that some of the crude oil generated from the Lucaogou Formation in the early stage underwent biodegradation due to tectonic uplift, resulting in biogenic methane and the formation of crude oil biodegraded gas.

With the characteristics of low fracturing pressure, little damage to the reservoirs, and assuming the role of carbon storage, supercritical carbon dioxide (SC-CO₂) fracturing is suitable for the development of unconventional oil and gas resources. Based on the tensile failure mechanism of rocks, this paper establishes a thermal-fluid-solid coupling initiation pressure model for SC-CO₂ fracturing. Using this model, the changes in formation temperature and pore pressure near a wellbore caused by invasion of CO₂ into the formation are analyzed, as well as the impact of these changes on the tangential stress of reservoir rocks. The field data of SC-CO₂ fracturing in a sandstone gas well are used to validate the reliability of the model. The results show that SC-CO₂ fracturing can significantly reduce the initiation pressure, which decreases with the increase in fracturing fluid injection rate. The minimum value of tangential stress is located at the well wall, and the direction of tangential stress caused by formation temperature and pore pressure is opposite, with the former greater than the latter. The increase in Poisson’s ratio, the increase in elastic modulus and the decrease in bottom hole temperature can reduce the initial fracturing pressure of the reservoir. The computation model established in this paper provides an effective method for understanding the reservoir fracturing mechanism under the condition of SC-CO₂ invasion.