Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
We have developed a wavelength-scale embedded active-region photonic-crystal laser using lateral p-i-n structure. Zn diffusion and Si ion implantation are used for p- and n-type doping. Room-temperature continuous-wave lasing behavior is clearly observed from the injection current dependence of the output power, 3dB-bandwidth of the peak, and lasing wavelength. The threshold current is 390 μA and the estimated effective threshold current is 9.4 μA. The output power in output waveguide is 1.82 μW for a 2.0-mA current injection. These results indicate that the embedded active-region structure effectively reduce the thermal resistance. Ultrasmall electrically driven lasers are an important step towards on-chip photonic network applications.
28 December 2018 in Journal of Lightwave Technology
To cope with the various nonlinear signal distortions in IM/DD transmission systems, a theoretical analysis on the Volterra nonlinear equalizer (VNLE) is provided, focusing on computational complexity aspects. The analysis yields a simple reduced-complexity scheme for the 2nd-order VNLE (R2-VNLE) based on a performance-complexity trade-off. An experimental verification is performed with single-sideband 28-GBaud PAM-4 signals, generated by an electro-absorption modulated distributed-feedback laser, over transmission distances of up to 80-km of standard single-mode fiber in the C-band. A comparison of the results for different equalization schemes, including a signal-signal beat interference mitigation technique, shows superior performance for the R2-VNLE.
14 August 2018 in Advances in Optics and Photonics
We review recent developments in directly modulated lasers (DMLs) with low operating energy for datacom and computercom applications. Key issues are their operating energy and the cost for employing them in these applications. To decrease the operating energy, it is important to reduce the active volume of the laser while maintaining the cavity -factor or photon lifetime in the cavity. Therefore, how to achieve high-reflectivity mirrors has been the main challenge in reducing the operating energy. In terms of the required output power from the lasers, the required input power into the photodetector and the transmission distance determine the lower limit of laser active volume. Therefore, the operating energy and output power are in a trade-off relationship. In designing the lasers, the cavity volume, quantum well number, and optical confinement factor are critical parameters. For reducing the cost, it is important to fabricate a large-scale photonic integrated circuit (PIC) comprising DMLs, an optical multiplexer, and monitor photodetectors because the lower assembly cost reduces the overall cost. In this context, silicon (Si) photonics technology plays a key role in fabricating large-scale PICs with low cost, and heterogeneous integration of DMLs and Si photonics devices has attracted much attention. We will describe fabrication technologies for heterogeneous integration and experimental results for DMLs on a Si substrate.
We have demonstrated an ultracompact buried heterostructure photonic crystal (PhC) laser, consisting of an InGaAsP-based active region (5.0 x 0.3 x 0.15 μm3) buried in an InP layer. By employing a buried heterostructure with an InP layer, we can greatly improve thermal resistance and carrier confinement. We therefore achieved a low threshold input power of 6.8 μW and a maximum output power in the output waveguide of −10.3 dBm by optical pumping. The output light is effectively coupled to the output waveguide with a high external differential quantum efficiency of 53%. We observed a clear eye opening for a 20-Gbit/s NRZ signal modulation with an absorbed input power of 175.2 μW, resulting in an energy cost of 8.76 fJ/bit. This is the smallest reported energy cost for any type of semiconductor laser.
4 December 2017 in IEEE Journal of Selected Topics in Quantum Electronics
High demand exists for low-operating energy optical links that use wavelength division multiplexing (WDM) technologies in datacenter networks. Thus, we fabricate a directly-modulated membrane distributed-reflector (DR) laser with low operating energy on a thermally-oxidized silicon (Si) substrate. Because we use epitaxial growth to bury an active region on a directly-bonded InP-based membrane, it needs to be kept within a critical thickness, which is related to the growth temperature and the thermal expansion coefficients of materials. In previous studies, we used 250-nm-thick structures, causing relatively large series resistance that limited device performance on such aspects as energy cost, output power, etc. In this study, we increase the III-V membrane thickness to 350 nm, which is close to the calculated critical thicknesses. We achieve the same high crystal quality of multi-quantum-wells (MQWs) found in our previous studies. The fabricated laser shows a differential resistance of 72 $\Omega$ and thermal resistance of 982 K/W. Thanks to a reduction in bias voltage, the laser can be directly modulated at 25.8 Gbit/s with an energy cost of 97 fJ/bit. In addition, due to a reduction in heat generation, direct modulation with a 50-Gbit/s NRZ signal is demonstrated by increasing bias current up to 10 mA.