The existence of many different dynamic large eddy simulation (LES) methods leads to questions about the theoretical foundation of dynamic LES methods. It was shown recently that the use of stochastic analysis enables a theoretically well based systematic derivation of a realizable linear dynamic model (LDM) and a realizable nonlinear dynamic model (NDM). A priori and a posteriori analyses of turbulent channel flow are used here to study the characteristic properties of these dynamic models. The LDM and NDM are compared with other dynamic models: the non-stabilized and stabilized dynamic Smagorinsky model (DSM), which is used in many applications of LES, and Wang-Bergstrom's dynamic model (WBDM), which represents an extension of the DSM. The DSM and WBDM do not represent realizable models because they are not derived as consequences of a realizable stochastic process. The comparisons reported here show that the LDM and NDM are based on a dynamic model formulation that avoids shortcomings of existing concepts. The LDM and NDM account for backscatter, and they are computationally stable without any modification. The LDM and NDM represent the instantaneous small scale structure of turbulence very well. Compared to the DSM and WBDM, respectively, the LDM and NDM are computationally more efficient.
1 July 2015 in Journal of Wind Engineering and Industrial Aerodynamics
High-speed vehicle motion on the highways produces localized winds whose energy can be harnessed. These local winds have less variability especially if the highway traffic is constant. The idea of extracting energy from highway winds has been conceptualized in many studies before. However, the feasibility of this idea has never been tested using analytical, computation, or experimental methods. In this study, we numerically compute the amount of power that can be extracted from local highway winds due to vehicular motion. A unsteady Reynolds-averaged Navier–Stokes (URANS) method is used for modeling the atmospheric boundary layer (ABL). Realistic computer-aided design (CAD) models of cars and trucks separated by spacing information obtained from the existing standards are used to model the vehicle motion. A vertical axis wind turbine (VAWT) is used for extracting energy from the wind. The entire framework of ABL, vehicles, and turbine is simulated using overset grids and multiple translating and rotating frames of reference. Many vehicle motion scenarios were compared to the case of an isolated wind turbine. The initial results show a significant increase in the power that can be extracted by these turbines. The average extracted power increases about 317% when compared to the case without any vehicular motion. Field measurements or wind tunnel studies are required to provide validation for the computations and to determine if more advanced turbulence modeling methodologies have to be employed for these studies.