Carbon emission reduction and steel slag (SS) treatment are challenges in the steel industry. The accelerated carbonation of SS and carbonated steel slag (CSS) as a supplementary cementitious material (SCM) in cement can achieve both large-scale utilization of SS and CO₂ emission reduction, which is conducive to low-carbon sustainable development. This paper presents the utilization status of CSS. The accelerated carbonation route and its effects on the properties of CSS are described. The carbonation reaction of SS leads to a decrease in the average density, an increase in the specific surface area, a refinement of the pore structure, and the precipitation of different forms of calcium carbonate on the CSS surface. Carbonation can increase the specific surface area of CSS by about 24–80%. The literature review revealed that the CO₂ uptake of CSS is 2–27 g/100 g SS. The effects of using CSS as an SCM in cement on the mechanical properties, workability, volume stability, durability, environmental performance, hydration kinetics, and microstructure of the materials are also analyzed and evaluated. Under certain conditions, CSS has a positive effect on cement hydration, which can improve the mechanical properties, workability, bulk stability, and sulfate resistance of SS cement mortar. Meanwhile, SS carbonation inhibits the leaching of heavy metal ions from the solid matrix. The application of CSS mainly focuses on material strength, with less attention being given to durability and environmental performance. The challenges and prospects for the large-scale utilization of CSS in the cement and concrete industry are described.

Industrial byproduct gypsum (BPG) is a secondary product that is mainly composed of calcium sulfate discharged during industrial production. BPG primarily consists of desulfurized gypsum, phosphogypsum, and titanium gypsum, which account for 88% of the total BPG in China. The large-scale utilization of these three types of solid waste is crucial for the safe disposal of BPG. BPG contains various impurities and harmful elements, limiting its applications. The continuous accumulation of BPG poses a serious threat to the safety of the environment. Based on a literature review (2021–2023), it was found that 52% of BPG is used in the preparation of cementitious materials, and the addition of BPG results in an average improvement of 7–30% in the mechanical properties of cementitious materials. Moreover, BPG has a positive impact on the immobilization of hazardous elements in raw materials. Therefore, the utilization of BPG in cementitious materials is beneficial for its large-scale disposal. This study primarily reviews the effects and mechanisms of BPG on the mechanical properties of cementitious materials and the solidification of hazardous elements. Most importantly, the review reveals that BPG positively influences the hydration activity of silica–alumina-based solid waste (such as steel slag and blast furnace slag) and alkaline solid waste (such as carbide slag and red mud). This improves the proportion of solid waste in cement and reduces production costs and carbon emissions. Finally, this article summarizes and proposes the application of BPG in cementitious materials. The application of BPG + silica–alumina solid waste + alkaline solid-waste-based cementitious materials is expected to realize a new type of green ecological chain for the joint utilization of multiple industrial solid wastes and to promote the low-carbon sustainable development of industrial clusters.